Worked example · Drama · Year 9
LNF: Numeracy → Understanding the number system helps us to represent and compare relationships between numbers and quantities → Calculation
A secure Year 9 response, annotated so you can see which success criterion each part meets. It is also the answer key. At 1:25, 1 m on stage = 40 mm on the model, and the model is 2 times the size of the 1:50 plan. Model acting area 320 mm by 240 mm; model actor 70 mm. Owain’s table (should be 72 mm), dresser (should be 80 mm) and door distance (should be 252 mm) are wrong; his rostrum (80 mm) is right. The model box needs 3 sheets of A3 card.
(a) 1:25 means 1 cm on the model stands for 25 cm on stage. 100 ÷ 25 = 4 cm, which is 40 mm.
(b) 40 ÷ 20 = 2. The model is twice as big as the plan.
(c) Real size in metres × 40 = model size in mm. Plan measurement × 2 = model measurement.
Turns the ratio into a simple rule before doing any calculations, so every later answer uses the same method. Evidences criterion 1.
| Item | Real size | Working | Model size (mm) |
|---|---|---|---|
| Acting area | 8 m by 6 m | 8 × 40; 6 × 40 | 320 by 240 |
| Back wall flat | 4.5 m by 2.4 m | 4.5 × 40; 2.4 × 40 | 180 by 96 |
| Door flat | 0.9 m by 2.1 m | 0.9 × 40; 2.1 × 40 | 36 by 84 |
| Table | 1.8 m by 0.9 m, 0.75 m high | 1.8 × 40; 0.9 × 40; 0.75 × 40 | 72 by 36, 30 high |
| Dresser height | 2 m | 2 × 40 | 80 |
| Chair seat | 0.45 m by 0.45 m | 0.45 × 40 | 18 by 18 |
| Rostrum | 2 m by 1 m, 0.3 m high | 2 × 40; 1 × 40; 0.3 × 40 | 80 by 40, 12 high |
| Model actor | 1.75 m tall | 1.75 × 40 | 70 |
Check: the actor (70 mm) is shorter than the door (84 mm), just as a 1.75 m person is shorter than a 2.1 m door. Comparing two sizes that must make sense together catches mistakes quickly.
Decimals are multiplied accurately (0.75 × 40 = 30 because 0.75 is three quarters and a quarter of 40 is 10). The sense check uses a real-world comparison. Evidences criteria 2 and 5.
| On the plan | Real distance on stage | On the model | |
|---|---|---|---|
| A | 60 mm | 60 × 50 = 3,000 mm = 3 m | 120 mm |
| B | 40 mm | 40 × 50 = 2,000 mm = 2 m | 80 mm |
| C | 126 mm | 126 × 50 = 6,300 mm = 6.3 m | 252 mm |
| D | 96 mm | 96 × 50 = 4,800 mm = 4.8 m | 192 mm |
| E | 36 mm | 36 × 50 = 1,800 mm = 1.8 m | 72 mm |
E gives 72 mm, the same as the table length in Step 2. Two different routes give the same answer, so both methods are right.
Every model measurement is the plan measurement doubled, which checks the rule from Step 1. Converting 3,000 mm to 3 m shows secure unit work. Evidences criteria 2, 3 and 5.
| Item | Right or wrong? | What Owain did wrong | Correct (mm) |
|---|---|---|---|
| Table length | Wrong | 1:25 means 25 mm on stage for every 1 mm on the model, not 25 mm per metre. 1 m = 1,000 mm, and 1,000 ÷ 25 = 40 mm. | 72 |
| Dresser height | Wrong | 2 ÷ 25 = 0.08 m is right, but 0.08 m = 0.08 × 1,000 = 80 mm, not 8 mm. | 80 |
| Rostrum length | Right | 2 × 40 = 80. | 80 |
| Door flat distance | Wrong | He used the 1:50 plan measurement as a 1:25 model measurement. The model is twice the size of the plan: 126 × 2. | 252 |
Next to a 70 mm actor, Owain’s 45 mm table would stand for a table only about 1.1 m long, too short to seat four, and his 8 mm dresser would not even reach the actor’s ankle. The director would not be able to judge the space, and the builders would make the wrong set.
Each error is named precisely (wrong ratio, wrong unit conversion, wrong scale) and the pupil recognises the one that is right. The final answer uses the model actor to show why the errors matter. Evidences criteria 3 and 4.
(a) Base 320 by 240 mm. Back wall 320 by 192 mm (4.8 × 40 = 192). Each side wall 240 by 192 mm.
(b) Yes. Turn both side walls on their sides so they are 192 mm wide and 240 mm tall. Side by side they take 192 + 192 = 384 mm of the 420 mm length, and 240 mm of the 297 mm width.
(c) 3 sheets: one for the base, one for the back wall, one for both side walls. The base and back wall cannot share a sheet: 240 + 192 = 432 mm, which is longer than 420 mm.
Solves a real making problem by rotating the pieces and checking both dimensions. Explains why a smaller number of sheets is impossible. Evidences criteria 2 and 5.