Worked example · Design Technology · Year 7
LNF: Numeracy → Learning about geometry helps us understand shape, space and position, and learning about measurement helps us quantify in the real world → Shape and space
A secure Year 7 response, annotated so you can see which success criterion each part meets. It is also the answer key. One piece: perimeter 320 mm (32 cm), area 60 cm². Sheet: 600 cm², so at most 10 pieces. Layout A fits 9 and wastes 1/10 (10%); layout B fits 10 with no waste. L-shaped offcut: x = 120 mm, y = 90 mm, perimeter 700 mm, area 192 cm², but only 2 pieces fit. Sanding: 3.2 m. Net area: 252 cm².
(a) 100 mm = 10 cm and 60 mm = 6 cm.
(b) 100 + 60 + 100 + 60 = 320 mm = 32 cm.
(c) 10 × 6 = 60 cm².
(d) The sheet is 30 cm by 20 cm. Perimeter: 30 + 20 + 30 + 20 = 100 cm. Area: 30 × 20 = 600 cm².
(e) Perimeter is a length, the distance around the edge, so it is in cm. Area counts squares that cover the surface, so it is in square centimetres.
Units are converted before multiplying, and perimeter is described as a distance around. Evidences criteria 1, 2 and 3.
(a) 600 ÷ 60 = 10. No more than 10 pieces can fit.
(b) Layout A: 300 ÷ 100 = 3 across. 200 ÷ 60 = 3 down, with 20 mm left over. 3 × 3 = 9 pieces.
(c) Layout B: 300 ÷ 60 = 5 across. 200 ÷ 100 = 2 down. 5 × 2 = 10 pieces.
(d) The sheet is 15 × 10 = 150 squares, and 150 × 4 = 600 cm². One piece is 5 × 3 = 15 squares, and 15 × 4 = 60 cm². Both match Step 1.
(e) 10 ÷ 3 = 3 remainder 1. 3 desk tidies, with 1 piece left over.
Both layouts are drawn and counted, and counting squares is used to check the formula. Turning the pieces round gains a piece. Evidences criteria 3 and 6.
(a) The strip is 300 mm by 20 mm, which is 30 cm by 2 cm. Area: 30 × 2 = 60 cm². Check: 600 − 9 × 60 = 600 − 540 = 60.
(b) 60/600 = 1/10 = 10%.
(c) Layout B, because it gives 10 pieces instead of 9 and wastes 0 cm² instead of 60 cm².
The waste is found two ways, and the fraction is simplified before it is changed to a percentage. Evidences criterion 3.
(a) x = 200 − 80 = 120 mm. y = 150 − 60 = 90 mm.
(b) 200 + 60 + 120 + 90 + 80 + 150 = 700 mm.
(c) A line straight down from the inside corner makes a tall rectangle 8 cm by 15 cm = 120 cm² and a short rectangle 12 cm by 6 cm = 72 cm². Total: 120 + 72 = 192 cm². (Or: the whole 20 cm by 15 cm rectangle is 300 cm², minus the missing 12 cm by 9 cm corner of 108 cm², gives 192 cm².)
(d) Only 2 pieces. Rhys is right that 192 cm² is more than 3 × 60 = 180 cm², but the shape is wrong. Two pieces fill the 200 mm by 60 mm strip along the bottom. The part above is only 80 mm by 90 mm, which is too narrow for 100 mm and too short for 100 mm, so no third piece fits whichever way round it goes.
Missing lengths come from the full lengths, and the area is checked by a second method. Part (d) explains why area alone is not enough. Evidences criteria 2, 4 and 6.
(a) 10 × 320 = 3200 mm = 320 cm = 3.2 m.
(b) Cutting the sheet makes new edges inside it. Every piece has its own 4 edges to sand, so the total is 3200 mm, not 1000 mm.
Perimeter is used as the length of edge, with correct conversions between mm, cm and m. Evidences criteria 1 and 2.
(a) A cuboid with no top (an open box). It has 5 faces. The base, front and back are rectangles (100 mm by 60 mm). The 2 ends are squares (60 mm by 60 mm).
(b) One correct net is the cross above: the base in the middle, the front and back on its long edges, an end on each short edge. Other nets are correct if they fold into the box with no gaps or overlaps.
(c) 3 × 60 + 2 × 36 = 180 + 72 = 252 cm². The cross is 11 squares by 9 squares, which is 220 mm by 180 mm, so it fits on 300 mm by 200 mm.
The 3D shape and its faces are named precisely, and the net area is built from the faces. Evidences criteria 3 and 5.