Worked example · Music · Year 9

Timing a performance set with BPM: Seren Wib

LNF: Numeracy → Learning about geometry helps us understand shape, space and position, and learning about measurement helps us quantify in the real world → Measurement

What this is

A secure Year 9 response, annotated so you can see which success criterion each part meets. It is also the answer key. Song lengths: 1 min 52 s, 2 min 0 s, 1 min 10.4 s and 2 min 40 s; total 7 min 42.4 s, which is 102.4 seconds over the 6-minute limit. Cadi’s song lasts 1 min 52 s, not “1 min 87 s”. Rhedeg without intro and ending lasts only 57.6 s, which breaks the 1-minute rule. A 1 min 30 s song at 120 BPM in 4/4 needs 45 bars; Golau lasts 2 minutes at 128 BPM. Many sets are correct in Step 4(c); check the total is 240 to 360 seconds and every piece is at least 60 seconds.

Step 1: beats and bars

SongBeats in a barBPMSeconds for one beatSeconds for one bar
Heol y Dŵr412060 ÷ 120 = 0.54 × 0.5 = 2
Hwiangerdd37260 ÷ 72 = 0.833…3 × 60 ÷ 72 = 2.5
Rhedeg415060 ÷ 150 = 0.44 × 0.4 = 1.6
Golau49660 ÷ 96 = 0.6254 × 0.625 = 2.5

Hwiangerdd’s beats are longer (0.833 s) but there are only 3 in a bar; Golau’s are shorter (0.625 s) but there are 4. Both come to 2.5 seconds a bar.

Uses the recurring decimal carefully: 3 × 60 ÷ 72 avoids rounding 0.833 too early. The explanation links both parts of the compound measure. Evidences criteria 1 and 2.

Step 2: how long is each song?

SongBarsBeatsWorkingLength
Heol y Dŵr5622456 × 2 = 112 s1 min 52 s
Hwiangerdd48144144 ÷ 72 = 2 minutes exactly2 min 0 s
Rhedeg4 + 36 + 4 = 4417644 × 1.6 = 70.4 s1 min 10.4 s
Golau32 × 2 = 6425664 × 2.5 = 160 s2 min 40 s
Total: 112 + 120 + 70.4 + 160 = 462.4 s7 min 42.4 s

Uses the seconds-per-bar route, which avoids decimal minutes altogether, and checks one song (Hwiangerdd) by the beats route. Adds in seconds, then converts once at the end. Evidences criteria 1 and 2.

Step 3: Cadi’s mistake

(a) There are only 60 seconds in a minute, so once you reach 60 seconds it becomes another minute. The seconds part of a time is always less than 60.

(b) 1.8666… minutes means 1 whole minute and 0.8666… of a minute. 0.8666… × 60 = 52 seconds. The song lasts 1 minute 52 seconds, which matches 56 bars × 2 seconds = 112 seconds.

Explains why the answer is impossible, converts the decimal part correctly and checks it by a second method. Evidences criterion 3.

Step 4: plan the set

(a) No. 6 minutes = 360 seconds. 462.4 − 360 = 102.4 seconds over.

(b) Without intro and ending: 36 bars × 1.6 = 57.6 seconds. That is less than 1 minute, so it would break the rule for a single piece.

(c) My set:

SongChange and workingLength
Heol y DŵrNo change112 s
HwiangerddNo change120 s
RhedegNo change70.4 s
GolauDropped0 s
Total: 112 + 120 + 70.4302.4 s = 5 min 2.4 s

5 min 2.4 s is between 4 and 6 minutes, and every piece is over 1 minute. Another correct plan keeps all four songs: Golau once through (32 × 2.5 = 80 s) and Heol y Dŵr without its second verse (40 × 2 = 80 s), giving 80 + 120 + 70.4 + 80 = 350.4 s = 5 min 50.4 s. Playing the blues in Rhedeg only twice does not work: 32 × 1.6 = 51.2 s.

Every plan is checked against both rules, the total and the minimum per piece, and a tempting cut is ruled out with a calculation. Evidences criteria 2 and 4.

Step 5: working backwards

(a) 1 min 30 s = 90 seconds. One bar of 4/4 at 120 BPM lasts 2 seconds. 90 ÷ 2 = 45 bars.

(b) 64 × 4 = 256 beats in 2 minutes, so 256 ÷ 2 = 128 BPM. That is faster than 96 BPM, which makes sense: to fit the same beats into less time, the band must play faster.

Uses the inverse operation to go from a time back to bars and to BPM, and sense-checks the direction of the change. Evidences criteria 1 and 5.

If you finish early: answers

Why this response is secure