Cover lesson · Drama · Year 9 · Intermediate
LNF: Numeracy → Understanding the number system helps us to represent and compare relationships between numbers and quantities → Calculation
Name: Class: Date:
What this practises: numeracy in Drama: using ratio and scale. Pupils convert real set sizes into model sizes at 1:25, convert measurements from a 1:50 ground plan, find and correct another pupil’s scale and unit errors, and work out how much card a model box needs. Set designers use ground plans and model boxes, and GCSE Drama (Made for Wales) offers set design as a design option in Units 1 and 2.
Print: this sheet, one per pupil, and the stimulus sheet “Tŵ Isaf: ground plan and set list”, one between two. Calculators are allowed. Nothing is built today; pupils plan the sizes for a model the class teacher may build later.
Run: 5 min pupils read the stimulus sheet · 7 min Step 1, what the scales mean · 12 min Step 2, model sizes · 10 min Step 3, from the plan to the model · 10 min Step 4, Owain’s errors · 11 min Step 5, card for the model box. Total 55 minutes.
Collect: this sheet, for the class teacher to check against the worked example.
Before a set is built, a designer makes a model box: a small, exact copy of the stage and set, so the director can see where actors will move and the builders know every size. Every length must be shrunk by the same ratio, or the actors will look like giants or the table like a doll’s. Today you will work out every size for a 1:25 model of the Tŵ Isaf kitchen.
(a) At 1:25, how many centimetres on the model stand for 1 m (100 cm) on stage? How many millimetres is that?
(b) On the 1:50 plan, 1 m on stage is 20 mm. On the 1:25 model it is your answer to (a). How many times bigger is the model than the plan?
(c) Complete: to turn a real size in metres into a model size in millimetres, multiply by . To turn a plan measurement into a model measurement, multiply by .
| Item | Real size | Working | Model size (mm) |
|---|---|---|---|
| Acting area | 8 m by 6 m | ||
| Back wall flat | 4.5 m by 2.4 m | ||
| Door flat | 0.9 m by 2.1 m | ||
| Table | 1.8 m by 0.9 m, 0.75 m high | ||
| Dresser height | 2 m | ||
| Chair seat | 0.45 m by 0.45 m | ||
| Rostrum | 2 m by 1 m, 0.3 m high | ||
| Model actor | 1.75 m tall |
Check: the model actor should be a little shorter than the model door flat. Is yours? Explain why this check is useful.
Use the measurements A to E in section 5 of the stimulus sheet. Work out the real distance on stage, then the distance on the model.
| On the 1:50 plan | Real distance on stage (working) | On the 1:25 model | |
|---|---|---|---|
| A | 60 mm | ||
| B | 40 mm | ||
| C | 126 mm | ||
| D | 96 mm | ||
| E | 36 mm |
Measurement E is the table. Does your answer match the model table length in Step 2? What does that tell you?
Read section 6 of the stimulus sheet. Three of Owain’s four sizes are wrong.
| Item | Right or wrong? | What Owain did wrong | Correct size (mm) |
|---|---|---|---|
| Table length | |||
| Dresser height | |||
| Rostrum length | |||
| Door flat distance |
If Owain built his table and dresser at his sizes, what would the director think when they put the 70 mm model actor next to them?
The model box has a base (the acting area) and three walls: a back wall and two side walls. The walls are as high as the lighting grid, 4.8 m.
(a) Work out the model size of each piece of card.
| Piece | Real size | Model size (mm) |
|---|---|---|
| Base | 8 m by 6 m | |
| Back wall | 8 m wide, 4.8 m high | |
| Each side wall | 6 m deep, 4.8 m high |
(b) A sheet of A3 card is 420 mm by 297 mm. Can both side walls be cut from one sheet of A3? Draw a quick sketch to show how, or explain why not.
(c) What is the smallest number of A3 sheets needed for the base and all three walls?