Cover lesson · Design Technology · Year 7 · Beginner
LNF: Numeracy → Learning about geometry helps us understand shape, space and position, and learning about measurement helps us quantify in the real world → Shape and space
Name: Class: Date:
What this practises: numeracy in Design Technology. Pupils plan how to cut parts for a desk tidy from a sheet of MDF (a board made from wood fibres). They find perimeters and areas of rectangles in millimetres and centimetres, test which way round the pieces fit best, work out the waste as a fraction and a percentage, find the area of an L-shaped offcut and draw the net of an open box. GCSE Design and Technology (teaching from 2026) expects pupils to estimate material quantities and make the best use of materials, and this is the first step.
Print: this sheet, one per pupil. It has all the information and grids, so there is no stimulus sheet. Pupils need a pencil, a rubber and a ruler. No calculator is needed.
Run: 8 min Step 1, perimeter and area · 12 min Step 2, two layouts on the grids · 6 min Step 3, waste · 10 min Step 4, the L-shaped offcut · 5 min Step 5, sanding · 9 min Step 6, the net. Total 50 minutes.
Collect: this sheet, for the class teacher to check against the worked example.
Year 7 at Gweithdy Glanrafon (an invented school workshop) are making a desk tidy. Each desk tidy needs 3 pieces of MDF, each 100 mm by 60 mm: the base, the front and the back. The MDF comes in sheets 300 mm by 200 mm. MDF costs money, so you will plan how to cut the most pieces from one sheet with the least waste.
Remember: 10 mm = 1 cm. Perimeter is the distance all the way around a shape. Area is the amount of flat surface inside it, measured in square units such as cm².
(a) Write the size of one piece in centimetres: 100 mm = ______ cm and 60 mm = ______ cm.
(b) Find the perimeter of one piece. Give your answer in mm and in cm.
(c) Find the area of one piece in cm², using length × width.
(d) Find the perimeter (in cm) and the area (in cm²) of the whole sheet.
(e) Why is perimeter measured in cm, but area in cm²?
(a) Divide the area of the sheet by the area of one piece. This is the most pieces that could possibly fit, if no MDF is wasted.
On the grids, 1 square = 20 mm, so a piece is 5 squares by 3 squares.
(b) Layout A: put the 100 mm side of each piece along the 300 mm side of the sheet. Draw as many pieces as you can on grid A. How many fit across? How many fit down? How many pieces altogether?
(c) Layout B: turn the pieces round, so the 60 mm side goes along the 300 mm side. Draw as many as you can on grid B. How many pieces altogether?
(d) Count the squares on the sheet and in one piece. Each square is 2 cm by 2 cm, so it covers 4 cm². Use this to check your areas from Step 1.
(e) Each desk tidy needs 3 pieces. Using the better layout, how many desk tidies can one sheet make? How many pieces are left over?
(a) In layout A, what size is the strip left over? What is its area in cm²?
(b) What fraction of the sheet is wasted in layout A? Write it in its simplest form, then as a percentage.
(c) Which layout should the workshop use? Give a reason with numbers.
This offcut was left over from another job. Do not measure the drawing: use the lengths given.
(a) Work out the missing lengths x and y.
(b) Find the perimeter of the offcut in mm.
(c) Split the L-shape into 2 rectangles with a line. Find the area of each, then the total area in cm².
(d) Rhys says: “The area is more than 3 pieces, so I can cut 3 pieces from it.” Sketch the pieces on the drawing. How many 100 mm by 60 mm pieces can you really cut? Explain.
After cutting, every edge of every piece is sanded smooth.
(a) What length of edge is sanded on all 10 pieces from layout B? Give your answer in mm, cm and m.
(b) Nia says: “The perimeter of the sheet is 1000 mm, so that is all the sanding.” Why is she wrong?
Before cutting MDF, designers make a model from card. The desk tidy is an open box: 100 mm long, 60 mm wide and 60 mm tall, with no lid. Ignore the thickness of the card.
(a) Name the 3D shape. How many faces does the open box have? Which faces are rectangles and which are squares?
(b) Draw a net of the open box on grid C (1 square = 20 mm). Label the base, front, back and 2 ends.
(c) Find the total area of the net in cm². Does your net fit on a 300 mm by 200 mm sheet of card?