Cover lesson · Art · Year 7 · Beginner

Enlarging a drawing with a grid: Y Chwilen

LNF: Numeracy → Understanding the number system helps us to represent and compare relationships between numbers and quantities → Calculation

Name: Class: Date:

Cover teacher: you need no subject knowledge

What this practises: numeracy in Art. Pupils use a scale factor to enlarge a drawing in proportion: they multiply measurements by 3, check that the proportions stay the same, explain why adding the same amount to every measurement distorts a drawing, and then enlarge the drawing square by square on a grid they measure themselves. This builds towards GCSE Art and Design (Made for Wales), where textile, graphic and three-dimensional work depends on scaling designs in proportion.

Print: this sheet, one per pupil, and the stimulus sheet “Y Chwilen: grid drawing and measurements”, one per pupil. Pupils also need one sheet of plain A4 paper, a sharp pencil, a rubber and a 30 cm ruler. No calculator is needed.

Run: 5 min pupils read the stimulus sheet · 8 min Step 1, scale factor and paper size · 7 min Step 2, the table · 8 min Step 3, Tomos’s mistake · 20 min Step 4, drawing the enlargement · 7 min Step 5, a poster and a badge. Total 55 minutes.

Collect: this sheet and the A4 drawing, for the class teacher to check against the worked example.

What you are doing

You will make the beetle drawing 3 times bigger without it changing shape. To do that, every length must be multiplied by the same number. That number is called the scale factor. A grid helps you do it accurately, one square at a time.

Step 1: the scale factor

Each small square is 1 cm wide. You will copy the drawing onto squares that are 3 cm wide.

(a) What is the scale factor from the small squares to the big squares?

(b) The small grid is 6 squares wide and 8 squares tall. How wide and how tall will the big grid be, in centimetres? Show your working.

(c) Will the big grid fit on A4 paper held portrait (21 cm wide, 29.7 cm tall)? How much space is left over across the width and down the height?

Step 2: enlarge the measurements

Multiply each measurement by the scale factor.

PartSmall drawingWorkingEnlarged drawing
Body: width3 cm
Body: length4.5 cm
Head: width1.5 cm
One spot: width0.5 cm
Middle leg: length1 cm

Check the proportions. On the small drawing the body is 1.5 times as long as it is wide (4.5 ÷ 3 = 1.5). Is that still true for your enlarged body? Show the calculation.

Step 3: what went wrong for Tomos?

Read section 4 of the stimulus sheet. Tomos added 2 cm to every measurement instead of multiplying.

(a) Work out how many times as long as it is wide Tomos’s body is (6.5 ÷ 5). Compare it with the answer of 1.5 for the real beetle. What does this tell you about his beetle’s shape?

(b) On the small drawing, the spot is 0.5 cm and the body is 3 cm wide, so 6 spots fit across the body. How many of Tomos’s spots fit across his body?

(c) Finish this sentence to explain Tomos’s mistake: “Adding 2 cm makes small parts grow much more than big parts, because …”

Step 4: draw the enlargement

  1. Turn your A4 paper portrait. Measure 1.5 cm in from the left edge and 3 cm down from the top. Mark a dot. This is the top left corner of your grid.
  2. Draw a rectangle 18 cm wide and 24 cm tall from that dot. Check that opposite sides are the same length.
  3. Along the top and bottom edges, mark a dot every 3 cm. Join the dots with light lines. Do the same down both sides.
  4. Label the columns A to F and the rows 1 to 8, exactly like the small grid. You should have 48 squares.
  5. Copy the beetle one square at a time. Look at where a line crosses the edge of a small square, then cross the big square at the same point. Halfway along a big square is 1.5 cm; one third is 1 cm.
  6. Check with your ruler: the body should be 9 cm wide. Then rub out the grid lines lightly and go over the beetle in a firm line.
Check on my drawingShould beI measured
Body width9 cm
Body length13.5 cm
Head width4.5 cm

Step 5: a poster and a badge

(a) The school wants the beetle on a poster at scale factor 5. How big would the whole grid be? Would it fit on A3 paper held portrait (29.7 cm wide, 42 cm tall)? Explain.

(b) Which whole-number scale factor is the biggest that does fit on A3? Show that it fits.

(c) For a badge, the beetle must shrink to half size. What is the scale factor, and how wide is the body on the badge?

Step by step

  1. 5 min Read the stimulus sheet.
  2. 8 min Step 1: the scale factor and whether it fits on A4.
  3. 7 min Step 2: enlarge the measurements and check the proportions.
  4. 8 min Step 3: explain Tomos’s mistake.
  5. 20 min Step 4: draw the grid and the enlarged beetle.
  6. 7 min Step 5: the poster and the badge.

Success criteria

If you finish early