Cover lesson · Art · Year 7 · Beginner

Plotting a mosaic with coordinates: Y Wennol

LNF: Numeracy → Learning about geometry helps us understand shape, space and position, and learning about measurement helps us quantify in the real world → Position

Name: Class: Date:

Cover teacher: you need no subject knowledge

What this practises: numeracy in Art. Pupils plan a symmetrical mosaic for an invented harbour wall. They read and plot coordinates, reflect half a design in a mirror line to complete it, change between grid references (which name a square) and coordinates (which name a point), count the tiles and write coordinate instructions for a partner. Artists and designers use grids like this to plan mosaics, textiles and prints, and GCSE Art and Design (Made for Wales) expects accurate planning of repeat and symmetrical designs.

Print: this sheet, one per pupil, and the stimulus sheet “Porth Wennol mosaic grid”, one per pupil (in colour if possible). Pupils need a sharp pencil and a ruler. Coloured pencils help but are not essential: pupils can write a colour letter in each tile instead.

Run: 3 min pupils read the stimulus sheet · 6 min Step 1, reading coordinates · 10 min Step 2, plotting the left half · 12 min Step 3, reflecting to finish the design · 8 min Step 4, grid references and coordinates · 5 min Step 5, counting tiles · 6 min Step 6, instructions for a partner, in pairs. Total 50 minutes.

Collect: this sheet, for the class teacher to check against the worked example. The finished swallow grid (plotted in Step 2, completed in Step 3) is the main evidence.

What you are doing

The swallow mosaic must be symmetrical. The artist has only planned the left half. You will read its coordinates, plot it, then reflect it in the mirror line x = 5 to finish the design. Coordinates always go across first, then up: (x, y).

Step 1: read the coordinates

Look at the picture in section 3 of the stimulus sheet. Siân’s list only has the navy blue tiles. Write the coordinates of every other tile in the left half.

Part of the swallowColourCoordinates
Eye (1 tile)Yellow (Y)
Face and throat (2 tiles)Red (R)
Chest (3 tiles)White (W)
Lower edge of the wing (4 tiles)Sky blue (S)

(b) What colour is the tile at (3, 1)? Which part of the swallow is it?

(c) Cai says the tile at the tip of the wing is at (9, 0). What mistake has he made?

Step 2: plot the left half

On the grid below, plot all 23 tiles of the left half: the 13 navy blue tiles from Siân’s list and the 10 tiles from Step 1. For each one, go across first, then up, and draw a small square centred on the point where the lines cross. Colour it, or write its letter inside. Tick each coordinate on the stimulus sheet as you plot it.

Blank coordinate grid from 0 to 10 on both axes with a dashed mirror line at x equals 5. Grid square letters A to J along the top and row numbers 1 to 10 on the right. 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 x y A B C D E F G H I J 1 2 3 4 5 6 7 8 9 10

Step 3: reflect to finish the design

To reflect a tile in the mirror line x = 5, count how far it is from the mirror line, then go the same distance on the other side. Its height (the y number) does not change.

(a) Complete the table.

PartLeft halfDistance from x = 5Reflected tile
Eye(4, 8)1(6, 8)
Tail tip(3, 1)
Wing tip(0, 9)
Top of wing(1, 9)
Wing(2, 8)
Wing edge(3, 6)
Tail(4, 2)
Chest(5, 5)

(b) Look at the x numbers in your table. Finish the rule: “To reflect in x = 5, the y number stays the same and the new x number is …”

(c) Some tiles do not move when you reflect them. Where are they, and how many are there?

(d) Now plot every reflected tile on your grid in Step 2 to finish the swallow. Check it by folding along the mirror line in your head: each tile should have a partner the same distance away on the other side.

Step 4: grid references and coordinates

The tiling team split the wall into 100 square panels. A panel is named by a grid reference: column A to J along the top, row 1 to 10 up the right side. Column A runs from x = 0 to x = 1, and row 1 runs from y = 0 to y = 1.

(a) A panel has corners at (2, 3), (3, 3), (3, 4) and (2, 4). What is its grid reference?

(b) Write the coordinates of the 4 corners of panel G8.

(c) The eye tile at (4, 8) sits exactly where 4 panels meet. Name all 4 panels.

(d) Cai says: “The tail tip at (3, 1) is in panel C1.” Is he right? Explain.

(e) Explain the difference between a grid reference and a pair of coordinates. Use the words square and point.

Step 5: count the tiles

ColourLeft half (Step 2)Finished design
Navy blue (N)
Sky blue (S)
Red (R)
White (W)
Yellow (Y)
Total

Check: the left half has 23 tiles, but the finished design does not have 46. Explain why, using your answer to Step 3 (c).

Step 6: coordinates for a partner

On your own, design a small symmetrical shape, such as a fish, a star or a boat, with 6 to 10 tiles on a grid from 0 to 6. Write its coordinates as a list below. Do not show your partner the picture. Swap lists and plot your partner’s coordinates on the small grid. Then compare with the design your partner planned.

Small blank coordinate grid from 0 to 6 on both axes for plotting your partners design. 0 1 2 3 4 5 6 0 1 2 3 4 5 6 x y

Did your partner’s plot match your plan? If not, was the mistake in the list or in the plotting?

Step by step

  1. 3 min Read the stimulus sheet.
  2. 6 min Step 1: read the coordinates of the coloured tiles.
  3. 10 min Step 2: plot the left half.
  4. 12 min Step 3: reflect in x = 5 and finish the swallow.
  5. 8 min Step 4: grid references and coordinates.
  6. 5 min Step 5: count the tiles.
  7. 6 min Step 6: write and swap coordinates with a partner.

Success criteria

If you finish early