Foundation Built Environment
WJEC Foundation Built Environment is a two year, 120 hour Entry Level and Level 1 course for learners in Years 10 and 11 who want a practical route into construction, leading on to VCSE Built Environment. Both units are teacher-set portfolios, marked in school and moderated by WJEC. Literacy runs through Unit 1, where learners name, describe and explain buildings, land, stakeholders and job roles through reading, discussion, role-play, posters and short written pieces, and through Unit 2, where they write safety guidance, set success criteria and review their own hand skills. Numeracy is practical and narrow: measuring in metric units, reading scales, checking angles and level, and marking out accurately before cutting. No calculations are set.
- Awarding body
- WJEC
- Level
- Entry Level and Level 1
- First taught
- September 2027
- Amount of literacy work
- Medium
- Amount of numeracy work
- Low
- Specification
- Open the specification
- Next step up
- VCSE Built Environment, Level 1 and Level 2
How this qualification is assessed
- Unit 1: Getting to Know the Built Environment: Centre marked non-examination assessment, portfolio of evidence, maximum assessment time 9 hours (typically 7 to 9 hours), 36 guided learning hours, 60 of the qualification's 132 points, tasks set by the teacher, marked by the centre and moderated by WJEC, available from summer 2028
- Unit 2: Practical Hand Skills: Centre marked non-examination assessment, portfolio of evidence, maximum assessment time 21 hours (typically 19 to 21 hours), 84 guided learning hours, 72 of the qualification's 132 points, tasks set by the teacher, marked by the centre and moderated by WJEC, available from summer 2029
Skills that use Planning and organising for different purposes, audiences and context
-
Explaining and comparing ideas in writing
The Unit 1 criteria move from naming and selecting at Entry 1 to outlining, explaining and describing at Entry 3 and Level 1, for example explaining the advantages and disadvantages of brownfield and greenfield land and describing the challenges of developing in Wales, using Welsh examples. Level 1 learners could write a report on building projects and their environmental concerns.
Literacy: Planning and organising for different purposes, audiences and context, Connectives and syntax
Getting pupils ready
- Year 7
- Pupils write three sentences explaining why a park and a playground are both public spaces, using because and so to link their ideas.
- Year 8
- Pupils write a paragraph explaining one advantage and one disadvantage of building on a field near their school, using however and on the other hand.
- Year 9
- Pupils write a short report comparing a brownfield and a greenfield site in their area, with an introduction, a paragraph on each and a conclusion saying which they would choose.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 1, Section 1.3.1, page 16; Unit 1, Assessment criteria LO1.3, page 21; Unit 1, Examples of tasks, LO1.1, page 23
“Explain the two types of land classification using Welsh examples”
Progression step 3
I can write a comprehensive account of a topic, theme or viewpoint.
I can use and adapt different structures within my writing, e.g. reporting an event, investigation or experiment.
I can use an increasing range of connectives to organise my ideas in sentences, paragraphs and whole texts.
Progression step 4
I can adapt my writing style, choosing and using the best structures for different contexts and purposes, e.g. to successfully describe, explain, persuade, discuss.
I can use summary, discussion of issues, detailed explanations and logic when covering a topic.
I can use a range of connectives specifically when organising my ideas in whole texts for different purposes.
-
Writing job descriptions and information sheets
For the job roles outcome, Entry 3 learners could write a job description or job advert for trade and professional roles such as a plasterer or quantity surveyor, and Level 1 learners produce information sheets on what each role involves. At Level 1 the criteria ask learners to describe the roles and responsibilities of all the listed jobs.
Literacy: Planning and organising for different purposes, audiences and context
Getting pupils ready
- Year 7
- Pupils fill in a job card for an electrician with headings for what they do, where they work and one tool they use.
- Year 8
- Pupils write a job advert for an apprentice bricklayer, using a real advert as a model, with duties, skills needed and how to apply.
- Year 9
- Pupils write a one page information sheet comparing a site manager and an architect, using subheadings and bullet points for responsibilities and skills.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 1, Sections 1.4.1 and 1.4.2, page 17; Unit 1, Assessment criteria LO1.4, page 22; Unit 1, Examples of tasks, LO1.4, page 26
“writes a job description or job advert for the different job roles”
Progression step 3
I can adapt my writing style and structure to suit the audience, purpose and context, e.g. suitable balance between facts and viewpoints, a precise conclusion.
I can explore different ways to plan, draft and present my work appropriately.
Progression step 4
I can adapt my writing style, choosing and using the best structures for different contexts and purposes, e.g. to successfully describe, explain, persuade, discuss.
I can select and use appropriate strategies to plan and develop my writing for different purposes and audiences.
-
Writing safety guidance and risk assessments
In the health and safety outcome of Unit 2, Entry 3 learners could write a handbook giving advice on working safely with reasons, and Level 1 learners create a good practice guide on hazards, risks and PPE or write a risk assessment with recommendations. Level 1 learners also read an accident report and recommend how to stop it happening again.
Literacy: Planning and organising for different purposes, audiences and context
Getting pupils ready
- Year 7
- Pupils write five workshop safety rules for a poster, each starting with a command verb and followed by a reason.
- Year 8
- Pupils complete a simple risk assessment table for a sawing task, listing each hazard, who it could harm and how to reduce the risk.
- Year 9
- Pupils read a short accident report from a school workshop and write a set of recommendations, with reasons, covering PPE, work area and tool use.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 2, Sections 2.1.1 to 2.1.3, page 30; Unit 2, Examples of tasks, LO2.1, page 44
“writes a risk assessment on specified areas and includes recommendations”
Progression step 3
I can adapt my writing style and structure to suit the audience, purpose and context, e.g. suitable balance between facts and viewpoints, a precise conclusion.
I can use and adapt different structures within my writing, e.g. reporting an event, investigation or experiment.
Progression step 4
I can use summary, discussion of issues, detailed explanations and logic when covering a topic.
I can organise and construct my writing effectively, connecting and developing my ideas for a range of different contexts.
-
Setting success criteria and reviewing own work
Learning outcome 2.7 asks learners to set specific, realistic goals for each practical task step and then review every task, covering planning, safety, accuracy, quality, strengths and how to improve. Entry 3 and Level 1 learners give reasons for their criteria, and the review can be written on a form, recorded or given as a presentation.
Literacy: Planning and organising for different purposes, audiences and context
Getting pupils ready
- Year 7
- Pupils tick a three point checklist before a making task, such as safe grip and a clean cut, and write one sentence afterwards on which point they met.
- Year 8
- Pupils write their own three success criteria for a practical task, then review the finished piece against each one, saying what went well and one thing to improve.
- Year 9
- Pupils set and justify success criteria for each step of a small project, then write a structured review using set questions on planning, safety, accuracy and finish.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 2, Sections 2.7.1 and 2.7.2, page 38; Unit 2, Assessment criteria LO2.7, page 43; Unit 2, Examples of tasks, LO2.7, page 46
“Set specific and realistic goals for each task step.”
Progression step 3
I can write about my thoughts, feelings and opinions, showing empathy and respect.
I can explore different ways to plan, draft and present my work appropriately.
Progression step 4
I can use summary, discussion of issues, detailed explanations and logic when covering a topic.
I can select and use appropriate strategies to plan and develop my writing for different purposes and audiences.
Good to know
- Appendix A (pages 54 and 55) maps listening, reading, speaking and writing to almost every content section of both units, and numeracy only to measuring and marking (2.3.2, 2.3.3), securing and shaping (2.4.2, 2.4.4) and the cost and waste sections of Unit 1 (1.2.2, 1.2.3, 1.3.3). The statistics strand is left blank.
- There are no marks for spelling, punctuation and grammar, but the review criteria note at Entry 1 that "Communication may not always be effective." (Unit 2, LO2.7, page 43).
- Learners do not have to write everything: evidence can include "responses to structured questions, either written or oral" (Section 3.3, page 48), and presentations and practical demonstrations are recorded on observation records (Section 3.6, page 49).
- Support depends on level. For Level 1, "Teachers and tutors can provide advice on planning and structuring their answers" (Section 3.4, page 49), while Entry 1 learners may use symbols or assistive technology.
- Discussion and debate tasks need care with group work: "group work is permitted only where specified" (Section 3.5, page 49), and each learner's contribution must be identifiable.
- Measuring is metric only: learners are taught the "use of metric system" (Unit 2, Section 2.3.2, page 32). Calculator use is not mentioned.
Links with other qualifications
The specification names VCSE Built Environment as the next step. Both qualifications build construction vocabulary, safe practical work, measuring and marking out, and reviewing one's own practical work. The VCSE steps these up: learners read a case study and technical documents such as briefs and method statements, justify choices of sites, methods and materials in writing, and write a structured evaluation, while its numeracy adds measuring to tolerances, reading plans, mixing to ratios, estimating quantities, costing within a budget and planning a critical path. Measuring and marking link with Mathematics and Numeracy, and land classification and development in Wales with GCSE Geography.
Source: WJEC Entry Level/Level 1 Foundation Built Environment specification, approved by Qualifications Wales, teaching from September 2027, for award from 2029 (© WJEC CBAC Ltd 2026).