Foundation Engineering
Foundation Engineering is a two-year Entry Level to Level 1 work-related qualification for learners in Years 10 and 11, leading on to VCSE Engineering. Literacy sits mostly in Unit 1, where learners name, outline, describe and explain engineering roles, tools, processes and safety rules through talks, presentations, short reports and matching tasks, and in Unit 2, where they read risk assessments, write a task plan, record results and report faults. Numeracy sits in the Unit 2 workshop: reading dimensions and angles on drawings, marking out, measuring with steel rules, vernier callipers and micrometers, and working to tolerances that tighten from plus or minus 2 mm at Entry 1 to plus or minus 0.8 mm at Level 1. There are no formulae or written tests.
- Awarding body
- WJEC
- Level
- Entry Level and Level 1
- First taught
- September 2027
- Amount of literacy work
- Medium
- Amount of numeracy work
- Medium
- Specification
- Open the specification
- Next step up
- VCSE Engineering, Level 1 and Level 2
How this qualification is assessed
- Unit 1: Introduction to Engineering: Centre marked non-examination assessment, portfolio of evidence, maximum assessment time 9 hours (typically 7 to 9 hours), 36 guided learning hours, 48 points of the 112 qualification points, teacher-set tasks assessed in centre and moderated by WJEC, first available summer 2028
- Unit 2: Producing a Product: Centre marked non-examination assessment, portfolio of evidence, maximum assessment time 21 hours (typically 19 to 21 hours), 84 guided learning hours, 64 points of the 112 qualification points, teacher-set practical workshop tasks assessed in centre and moderated by WJEC, first available summer 2029
Skills that use Clarity and vocabulary
-
Using engineering vocabulary for tools, processes and safety
Unit 1 is full of technical terms: centre punch, scriber, tap and die, vernier calliper, pop rivets, anodising, metal inert gas welding, and legislation such as COSHH and the Health and Safety at Work Act. Learners use these names to state, outline and explain purposes in their portfolio, including cloze tasks at Entry 3.
Literacy: Vocabulary, spelling, grammar, Clarity and vocabulary
Getting pupils ready
- Year 7
- Pupils label photos of workshop tools such as a scriber, centre punch, engineer's square and file, and learn the spellings in a weekly word check.
- Year 8
- Pupils complete cloze sentences about measuring tools, such as a micrometer is used to measure small sizes accurately, using a word bank.
- Year 9
- Pupils write their own one sentence definitions of COSHH, PPE, anodising and pop riveting and use each term correctly in a short safety talk.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 1, Sections 1.3.1, 1.3.2 and 1.4.4, pages 15 and 17; Unit 1, LO1.3 example tasks, page 25
“the learner completes cloze statements describing the purpose”
Progression step 3
I can use varied, appropriate and precise vocabulary including area of learning and experience/discipline-specific words for different purposes.
I can use strategies to correctly spell polysyllabic, complex and irregular words in the context of each area of learning and experience.
I can express issues and ideas clearly using area of learning and experience/discipline-specific vocabulary and examples.
Progression step 4
I have experienced a range of area of learning and experience/discipline-specific and general academic vocabulary, and can use them in my own communication.
I can use a variety of strategies and resources to spell familiar and unfamiliar vocabulary and area of learning and experience/discipline-specific words correctly.
I have experienced a range of area of learning and experience/discipline-specific and general academic vocabulary, and can use them in my own communication.
-
Giving talks and presentations about engineering
Appendix A maps speaking to every section of Unit 1, and the example tasks include spoken role and sector tasks at Entry 3 and presentations, question time interviews and safety briefings at Level 1. Spoken work is evidenced through observation records or video and audio recordings.
Literacy: Clarity and vocabulary, Purpose, Questioning
Getting pupils ready
- Year 7
- Pupils hold up a tool and tell the class its name and one job it is used for.
- Year 8
- Pupils give a one minute talk to a small group about an engineering product they use every day, then answer two questions from the group.
- Year 9
- Pupils give a three minute presentation on an engineering sector in Wales, such as aerospace or marine, using key words and examples, and answer questions from the class.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 1, example tasks, pages 24 to 27; Section 3.3, page 47; Appendix A, page 55
“the learner prepares and delivers a presentation outlining the main different”
Progression step 3
I can speak clearly, recognising the appropriate language for different audiences and purposes, and varying my expression, vocabulary, tone and gestures to engage the audience.
I can organise talk so that different audiences in different contexts can follow what is being said, including using formal language.
I can ask and answer questions, building on and developing the ideas of others in group discussions.
Progression step 4
I can speak clearly, selecting and adapting my language appropriately for a range of audiences and purposes, conveying meaning effectively to the audience.
I can organise talk effectively to respond to how listeners are reacting by adapting what I say and how I say it.
-
Reporting faults and damage clearly
When closing down learners inspect tools, equipment and PPE for wear or damage and report any issues. At Level 1 they present a clear written report of faults or defects found with recommended actions, and fault or defect reports are part of the portfolio evidence.
Literacy: Planning and organising for different purposes, audiences and context, Clarity and vocabulary
Getting pupils ready
- Year 7
- At the end of a practical lesson pupils tell the technician about any blunt or damaged tool, using its correct name and saying what is wrong.
- Year 8
- Pupils check a tray of hand tools against a checklist and write a one line note for each faulty tool saying what is wrong.
- Year 9
- Pupils inspect a workbench with planted faults, such as a loose hammer head and a split glove, and write a short fault report saying where each fault is, what is wrong and what should be done.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 2, Sections 2.5.1 and 2.5.3, page 33; Unit 2, LO2.5 example tasks, page 43; Unit 2, portfolio evidence, page 45
“present a clear written report of faults or defects found”
Progression step 3
I can use and adapt different structures within my writing, e.g. reporting an event, investigation or experiment.
I can express issues and ideas clearly using area of learning and experience/discipline-specific vocabulary and examples.
Progression step 4
I can adapt my writing style, choosing and using the best structures for different contexts and purposes, e.g. to successfully describe, explain, persuade, discuss.
I can speak clearly, selecting and adapting my language appropriately for a range of audiences and purposes, conveying meaning effectively to the audience.
Good to know
- There are no written tests. Both units are a "Portfolio of evidence" that is "Assessed in centre and moderated by WJEC" (Summary of assessment, page 5), so literacy and numeracy are shown through practical work, writing and talk.
- Spoken work counts: evidence types include "teacher/assessor questioning" with "responses to structured questions, either written or oral, to confirm understanding" (Section 3.3, page 47), and presentations are recorded on "observation records" (Section 3.6, page 48).
- Support varies by level: Entry 1 learners may need "use of symbols, or assistive technology" and Entry 2 learners may use "scaffolded templates" (Section 3.4, page 48).
- No marks for spelling, punctuation and grammar are mentioned; "judgements are made solely against the assessment criteria" (Section 3.6, page 48).
- The numeracy is measurement rather than calculation. Learners work "within general set tolerances" (Section 2.3.4, page 32), from plus or minus 2 mm to 0.8 mm for hand fitting (page 36), and the specification has no formulae, area, volume or calculator work, unlike VCSE Engineering.
- Appendix A (pages 55 and 56) maps listening, reading, speaking and writing to every Unit 1 section, speaking and writing to Unit 2 planning (2.2.1) and recording outcomes (2.4.3), and all four numeracy strands, including statistics, to 1.3.1, 1.3.2 and most of Unit 2.
Links with other qualifications
Foundation Engineering is the step below VCSE Engineering, which the specification names as a progression route. Both ask learners to read drawings, measure with vernier callipers and micrometers, work to tolerances, write a plan and risk assessment, record results and suggest improvements. VCSE Engineering steps these up with closer tolerances judged against full engineering drawings, unit conversions, area, volume and waste, spindle speed and Ohm's law calculations in a one hour written test, and reading a case study on an engineering project in Wales. The measuring and recording work also links with GCSE Mathematics and Numeracy and GCSE Design and Technology, and the talks and reports build on GCSE English Language and Literature skills.
Source: WJEC Entry Level/Level 1 Foundation Engineering specification, approved by Qualifications Wales, teaching from September 2027, for award from 2029 (© WJEC CBAC Ltd 2026).