VCSE Hospitality and Catering
The VTCT Skills VCSE Hospitality and Catering has a 28 mark multiple-choice examination on Unit 1, covering the industry, food safety, nutrition, customer care and sustainability, and a 12 hour Unit 2 Non-Examined Assessment in which learners plan, cook and serve a dish. Literacy sits mainly in Unit 2: reading the brief, writing a meal and service plan, justifying dish choices, evaluating their work from a reflective journal, and speaking and listening to guests during table service, with Welsh greetings where appropriate. Numeracy is practical: safe temperatures and times, weighing and portioning, costing a dish within budget, timing a plan, and reading nutrition labels. Key Stage 3 should build timed, costed plans and honest written evaluations.
- Awarding body
- VTCT Skills
- Level
- Level 1 and Level 2
- First taught
- September 2027
- Amount of literacy work
- Medium
- Amount of numeracy work
- Medium
- Specification
- Open the specification
- Step before
- Foundation Hospitality and Catering, Entry Level and Level 1
How this qualification is assessed
- Unit 1 (UWHC1): Introduction to the Hospitality and Catering industry: MCQ External theory examination 60 minutes, 30%, 28 marks, multiple-choice questions on LO1 to LO5, set and marked by VTCT Skills, taken on screen with a paper option, sat in the April or May series at the end of Year 10 with one resit in Year 11 (best result counts); 40 GLH
- Unit 2 (UWHC2): Planning, preparing and serving a meal: Non-Examined Assessment, maximum 12 hours, 70%, four tasks worth 8, 12, 16 and 12 marks, set by VTCT Skills with a new brief each year, released in December of Year 11 and submitted in April, marked and internally quality assured by the centre with a level-based mark scheme, externally moderated by VTCT Skills, no resit; 100 GLH
Skills that use Measurement
-
Applying food safety temperatures and times
Unit 1 sets exact figures: cooking to 70°C for 2 minutes or 75°C for 30 seconds, chilled food below 5°C, frozen food below minus 18°C and handwashing for at least 20 seconds, which are tested in the examination. In Unit 2 learners use food probes or visual checks to make sure food is safely cooked.
Numeracy: Measurement, Communicating with symbols, Conceptual understanding, Strategic competence
Getting pupils ready
- Year 7
- Pupils use a probe thermometer to measure chilled, room temperature and hot water, record each reading in °C, and decide which would be safe for storing chilled food.
- Year 8
- Pupils mark the freezer, fridge, cooking and reheating temperatures on a vertical number line from minus 20°C to 80°C and work out the differences between them.
- Year 9
- Pupils probe a cooked chicken portion, record the reading and the time it was held, and decide in writing whether it meets the 70°C for 2 minutes or 75°C for 30 seconds rule.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 1, LO2, sections 2.1 and 2.3, pages 38 and 42; Unit 2, LO2, section 2.5, page 62; assessment criteria 2.3 and 2.5, pages 53 and 71
“Cook food to safe internal temperatures 70°C for 2 minutes or 75°C for 30 seconds”
Progression step 3
I can read and interpret scales or divisions on a range of measuring instruments.
I can measure and record temperatures involving positive and negative readings.
I can use appropriate notation, symbols and units of measurement.
Progression step 4
I can read and interpret scales on a range of measuring instruments.
I can use appropriate notation, symbols and units of measurement, including compound measures.
I can interpret answers within the context of the problem and consider whether answers, including calculator, analogue and digital displays, are sensible.
Progression step 5
I can interpret answers within the context of the problem and consider whether answers, including calculator, analogue and digital displays, are sensible.
I can identify, measure or obtain required information to complete the task.
-
Weighing, measuring and portioning accurately
Unit 2 learners weigh and measure ingredients with scales, measuring jugs and spoons, understanding why accuracy affects the result, list ingredient quantities on their shopping list, and serve equal portions with portioning tools. The assessment criteria for preparing ingredients and plating require this, and VTCT maps measuring ingredients accurately to numeracy.
Numeracy: Measurement, The number system, Strategic competence
Getting pupils ready
- Year 7
- Pupils weigh flour, butter and sugar on digital scales for a batch of Welsh cakes and record each mass in grams.
- Year 8
- Pupils measure liquids in millilitres with a jug and in spoons for a soup, convert the total to litres, and portion it into equal bowls with a ladle.
- Year 9
- Pupils make the same muffin recipe twice, once with careful weighing and once with rough estimates, compare the results, and explain how accurate each measurement needs to be.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 2, LO2, sections 2.4 and 2.6, pages 62 and 63; LO1, section 1.2, page 58; assessment criteria 2.4 and 2.6, page 71; Section 11.1, page 73
“Weigh and measure ingredients accurately using scales, measuring jugs and spoons, understanding why accuracy affects cooking results”
Progression step 3
I can read and interpret scales or divisions on a range of measuring instruments.
I can record measurements in different ways, e.g. 1.3kg = 1kg 300g, 4.2cm = 4cm 2mm.
Progression step 4
I can read and interpret scales on a range of measuring instruments.
I can use the common units of measure, convert between related units of the metric system and carry out calculations.
Progression step 5
I can recognise and define limitations on accuracy of measurements, e.g. upper and lower bounds.
I can identify, measure or obtain required information to complete the task.
-
Timing a plan and checking it against reality
The Unit 2 time plan breaks the work into stages, sequences tasks and overlaps them safely, learners keep track of time with timers while cooking, and in their evaluation they assess whether planned preparation and cooking times were accurate. VTCT maps time plans and time evaluation to numeracy.
Numeracy: Measurement, Strategic competence, Logical reasoning
Getting pupils ready
- Year 7
- Pupils time each stage of making a simple dish with a kitchen timer and add the times to their recipe card.
- Year 8
- Pupils work back from a 12:30 serving time to write a timed plan for a two course lunch, showing when each task must start.
- Year 9
- Pupils record planned and actual times for each stage of a practical in a table, calculate the difference for each stage, and explain which estimates were furthest out and why.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 2, LO1, section 1.2, page 58; LO2, section 2.5, page 62; LO4, sections 4.1 and 4.2, pages 68 and 69; Section 11.1, page 73
“Assess whether planned preparation and cooking times were accurate and achievable”
Progression step 3
I can use and interpret calendars, timetables and schedules to plan events and activities, and make calculations as part of the planning journey.
I can carry out practical activities involving timed events and explain which unit of time is the most appropriate.
I can prioritise and organise the relevant steps needed to complete the task or reach a solution.
Progression step 4
I can select, trial and evaluate a variety of possible approaches and break complex problems into a series of tasks.
I can prioritise and organise the relevant steps needed to complete the task or reach a solution.
Progression step 5
I can prioritise and organise the relevant steps needed to complete the task or reach a solution.
I can justify my procedures, predictions and conjectures.
-
Reading nutrition labels, portions and sustainability figures
Unit 1 covers energy balance, nutrition labels showing energy, fat, sugar and salt, portion control and the Eatwell Guide proportions, allergen limits such as 10mg/kg for sulphites, and carbon footprint and food miles. These are tested in the multiple-choice examination, and VTCT maps portion control, nutritional values and sustainability metrics to numeracy.
Numeracy: Interpreting data, Relationships within the number system, Measurement
Getting pupils ready
- Year 7
- Pupils compare the traffic light labels on two breakfast cereals and say which has less sugar and salt per 100 g.
- Year 8
- Pupils use the Eatwell Guide to estimate what fraction of a plate each food group should fill, then compare it with a photograph of a school lunch.
- Year 9
- Pupils compare the nutrition labels of two ready meals per 100 g and per portion, and work out how far the ingredients for a dish travelled to compare the food miles of local and imported produce.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 1, LO3, sections 3.1 to 3.3, pages 43 to 46; LO5, section 5.1, page 50; assessment criteria 3.1, 3.3 and 5.1, pages 53 and 54; Section 11.1, page 73
“Food packaging shows energy, fat, sugar and salt content”
Progression step 3
I can extract and interpret information from an increasing range of diagrams, timetables and graphs (including pie charts).
I can use equivalence of fractions, decimals and percentages to compare proportions.
Progression step 4
I can interpret mathematical information; drawing inferences from graphs, diagrams and data, including discussion on limitations of data.
I can represent and use compound measures, using standard units.
Progression step 5
I can interpret mathematical information; drawing inferences from graphs, diagrams and data, including discussion on limitations of data.
I can understand and use a variety of compound measures.
Good to know
- No marks for spelling, punctuation and grammar are mentioned. The NEA is marked by the centre "using a level-based mark scheme issued by VTCT Skills" (Section 5.1, page 16), and the descriptors are in the separate "VCSE NEA Teachers/Assessors Guidance and Marking Criteria" (page 5).
- Calculator use is not stated anywhere in the specification, for either the examination or the NEA.
- Unit 1 has no written answers: it is "a multiple-choice question paper" (Unit 1, Assessment requirements, page 53), so all extended writing sits in the Unit 2 NEA.
- The specification does not say how spoken table service is evidenced for marking and moderation; it only tells teachers to help learners understand "The ways in which learners should prepare and present their evidence" (Section 5.4.4, page 20).
- Welsh is encouraged, not required: learners "Use basic Welsh greetings (where appropriate)" (Unit 2, section 3.3, page 66).
- Teachers must not "Coach learners in how to produce the evidence or what evidence to produce" (Section 5.4.6, page 21), and there is "no resit opportunity for the Non-Examined Assessment" (Section 5.4.8, page 21).
- VTCT's Curriculum for Wales mapping (Section 11.1, page 73) links literacy to "(writing meal plans and justifications)" and written evaluation, and numeracy to Unit 1 LO3.3 and LO5 and to Unit 2 "(costing dishes; time plans)", measuring and time evaluation.
- The document contradicts itself on NEA marking: Section 5.1 (page 16) lists task marking as "high control", while Appendix 1, A1.2 (page 78) lists task marking for the same NEA as "medium control".
Links with other qualifications
Compared with the WJEC VCSE Hospitality and Catering, where learners write either a justified menu and production plan or an event proposal and event plan in a chosen 70% unit, sit an on-screen food safety examination and complete a separate externally set Unit 1 assignment, the VTCT Skills version asks every learner to plan, cook and serve, with all extended writing, costing and timing in one NEA and only a multiple-choice examination for Unit 1. Temperatures, weighing, nutrition and evaluating practical work overlap with GCSE Food and Nutrition, costing overlaps with GCSE Business, and the Skills for Work topics VTCT suggests, Customer Service and Working in Wales, match WJEC Skills Suite units already on the page.
Source: VTCT Skills Level 1/2 VCSE Hospitality and Catering Qualification Specification, HC2W1 (qualification number C00/5368/9), Version P1, issued 01/09/2026.