VCSE Hospitality and Catering
Hospitality and Catering asks learners to read annual assignment briefs closely, answer 30 multiple-choice questions on food safety on screen, and write justifications, proposals, production or event plans and evaluations in the 70% unit, while speaking and listening to customers, in Welsh where possible, at a Unit 4 event. Its numeracy is practical and applied: exact food safety temperatures and time limits, weighing, measuring and scaling quantities and portions, costing and budgeting, timing a plan, and using customer feedback. The single biggest thing Key Stage 3 should build is the habit of turning a brief into a clear, timed and costed plan, then writing an honest evaluation against it.
- Awarding body
- WJEC
- Level
- Level 1 and Level 2
- First taught
- September 2027
- Amount of literacy work
- Medium
- Amount of numeracy work
- Medium
- Specification
- Open the specification
- Step before
- Foundation Hospitality and Catering, Entry Level and Level 1
How this qualification is assessed
- Unit 1: Introduction to the Hospitality and Catering Industry: Mandatory external non-examination assessment 2 hours, 15%, 45 marks, set and marked by WJEC, tasks based on an assignment brief that changes annually
- Unit 2: Food Safety, Hygiene, and Allergens: Mandatory digital examination 1 hour, 15%, 30 marks, 30 multiple-choice questions, on screen only via Surpass, auto-marked and graded pass or fail
- Unit 3: Catering in Action (option): Non-examination assessment 12 hours, 70%, 105 marks, set by WJEC, marked by the centre and moderated by WJEC; centres choose Unit 3 or Unit 4
- Unit 4: Hospitality in Action (option): Non-examination assessment 12 hours, 70%, 105 marks, set by WJEC, marked by the centre and moderated by WJEC; centres choose Unit 3 or Unit 4
Skills that use Measurement
-
Reading and applying food safety temperatures
Unit 2 sets exact temperatures: fridges at 5°C or below, freezers below minus 18°C, cooking at 70°C for two minutes, reheating to 75°C for 30 seconds, hot holding at 63°C or above, and chilling to 8°C or below. Learners must know these for the examination, read probe thermometers, and apply correct temperature control in their Unit 3 or Unit 4 practical work.
Numeracy: Measurement, Communicating with symbols, Conceptual understanding, Strategic competence
Getting pupils ready
- Year 7
- Pupils use a probe thermometer to take the temperature of chilled, room temperature and hot water, record each reading in °C, and decide which would be safe for storing chilled food.
- Year 8
- Pupils mark the fridge, freezer, cooking, reheating and hot-holding temperatures on a vertical number line from minus 20°C to 80°C and work out the gaps between them.
- Year 9
- Pupils check reheated soup and a cooked chicken portion with a probe, record the reading and time, and decide in writing whether each meets the 75°C or 70°C rule.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 2, Section 2.1.2, pages 27 and 28; Unit 2, Section 2.2.2, page 31; Unit 3, Section 3.3.1, page 39
“ensuring reheated food reaches a temperature of 75 °C for a minimum of 30 seconds”
Progression step 3
I can read and interpret scales or divisions on a range of measuring instruments.
I can measure and record temperatures involving positive and negative readings.
I can use appropriate notation, symbols and units of measurement.
Progression step 4
I can read and interpret scales on a range of measuring instruments.
I can use appropriate notation, symbols and units of measurement, including compound measures.
I can interpret answers within the context of the problem and consider whether answers, including calculator, analogue and digital displays, are sensible.
Progression step 5
I can identify, measure or obtain required information to complete the task.
I can interpret answers within the context of the problem and consider whether answers, including calculator, analogue and digital displays, are sensible.
I can use appropriate notation, symbols and units of measurement, including compound measures.
-
Working with times, dates and stock rotation
Unit 2 learners apply time rules such as the two hour limit for food held below 63°C, 48 hours free of symptoms before staff return to work, registering a business at least 28 days before trading, and stock rotation using date marks, use-by and best before dates. Unit 3 learners must also know the difference between use-by and best before dates in their practical work.
Numeracy: Measurement, Strategic competence, Conceptual understanding
Getting pupils ready
- Year 7
- Pupils sort a box of empty food packets by their use-by and best before dates and decide which should be used first, first in, first out.
- Year 8
- Given the time each dish was put out on a buffet, pupils work out on a timeline the latest time it can stay out under the two hour rule.
- Year 9
- Pupils keep a stock list in a table with delivery and use-by dates, calculate how many days each item has left, and plan which dishes should use them this week.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 2, Sections 2.1.2, 2.1.3 and 2.2.2, pages 26, 28, 29 and 31; Unit 3, Section 3.3.1, page 39
“If food has been out for more than two hours, it must be thrown away.”
Progression step 3
I can read and use analogue and digital clocks.
I can use and interpret calendars, timetables and schedules to plan events and activities, and make calculations as part of the planning journey.
I can carry out practical activities involving timed events and explain which unit of time is the most appropriate.
Progression step 4
I can identify, measure or obtain required information to complete the task.
I can prioritise and organise the relevant steps needed to complete the task or reach a solution.
I can interpret answers within the context of the problem and consider whether answers, including calculator, analogue and digital displays, are sensible.
Progression step 5
I can identify, measure or obtain required information to complete the task.
I can interpret answers within the context of the problem and consider whether answers, including calculator, analogue and digital displays, are sensible.
-
Weighing, measuring and scaling quantities and portions
Unit 3 production plans must list ingredients and quantities, measuring and weighing are listed preparation techniques in Appendix A, and learners must show portion control when presenting food. Unit 4 learners plan food for a number of guests and must plan for fluctuating numbers of attendees.
Numeracy: Calculation, Measurement, Strategic competence, Conceptual understanding
Getting pupils ready
- Year 7
- Pupils weigh flour, butter and sugar on digital scales for a batch of Welsh cakes and record each mass in grams.
- Year 8
- Pupils scale a soup recipe for 4 people up to 10 people and convert the liquid from millilitres to litres.
- Year 9
- Pupils work out quantities and portion sizes for a breakfast event for 60 guests, then recalculate for 45 and 80 guests to show how they would cope with changing numbers.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 3, Sections 3.2.2 and 3.3.4, pages 38 and 41; Appendix A, pages 60 and 61; Unit 4, Section 4.2.3, page 47
“attendees, including fluctuating numbers”
Progression step 3
I can use ratio and proportion to calculate quantities.
I can read and interpret scales or divisions on a range of measuring instruments.
I can record measurements in different ways, e.g. 1.3kg = 1kg 300g, 4.2cm = 4cm 2mm.
Progression step 4
I can use ratio and proportion including map scales.
I can use the common units of measure, convert between related units of the metric system and carry out calculations.
I can read and interpret scales on a range of measuring instruments.
Progression step 5
I can use multipliers as an efficient method when working with percentages, e.g. multiply by 1.2 to increase an amount by 20%.
I can recognise, model and apply the underlying mathematical structures and ideas within problems, in order to formulate and solve them.
I can interpret answers within the context of the problem and consider whether answers, including calculator, analogue and digital displays, are sensible.
-
Timing and scheduling a production or event plan
Unit 3 production plans need timings and sequencing so that dishes are ready on time, and Unit 4 event plans must give each step a duration and a deadline. Learners then evaluate their own time management in both units.
Numeracy: Measurement, Strategic competence, Logical reasoning
Getting pupils ready
- Year 7
- Pupils time each stage of making a simple dish with a stopwatch and add the times to their recipe card.
- Year 8
- Pupils work back from a 12:30 serving time to write a timed plan for a two course lunch, showing when each task must start.
- Year 9
- Pupils build a schedule for a one hour school event with start times, durations and deadlines for each team member, and add spare time for two things that might go wrong.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 3, Sections 3.2.2 and 3.4.1, pages 38 and 41; Unit 4, Sections 4.2.3 and 4.4.1, pages 47 and 50
“timing: specific steps, durations, and deadlines”
Progression step 3
I can use and interpret calendars, timetables and schedules to plan events and activities, and make calculations as part of the planning journey.
I can carry out practical activities involving timed events and explain which unit of time is the most appropriate.
I can prioritise and organise the relevant steps needed to complete the task or reach a solution.
Progression step 4
I can prioritise and organise the relevant steps needed to complete the task or reach a solution.
I can select, trial and evaluate a variety of possible approaches and break complex problems into a series of tasks.
I can justify my procedures, predictions and conjectures.
Progression step 5
I can prioritise and organise the relevant steps needed to complete the task or reach a solution.
I can select, trial and evaluate a variety of possible approaches and break complex problems into a series of tasks.
I can justify my procedures, predictions and conjectures.
Good to know
- No marks for spelling, punctuation and grammar are mentioned. AO3, "Interpret and evaluate information/ideas/evidence of the hospitality and catering industry", is 15% of the qualification (Section 3.1, page 52).
- Calculator use is not stated. Section 3 says "The Assessment Pack will include all detailed information relating to assessment." (page 52), so check the Assessment Pack for each unit.
- Unit 2 can be awarded as a standalone Level 2 Certificate, for which "candidates are required to achieve a minimum score of approximately 75%" (Summary of assessment, page 5), and "Special consideration cannot be applied for the awarding of Unit 2" (Section 3.2, page 53).
- Written evidence may be handwritten: "The assessment must be submitted digitally, either as scanned handwritten responses or completed digitally." (Section 3.2, page 53).
- Speaking can be credited through observation: "performance evidence (for example, presentations) must be documented using observation records that include descriptive and summative comments" (Section 3.3, page 55). Teachers "must not provide feedback on the evidence being produced" (page 55).
- Appendix C (pages 65 and 66) maps reading and writing to all sections of every unit, speaking only to section 1.2.2 and parts of Unit 4, numeracy to no section of Unit 1, and the statistics strand to no unit at all.
Links with other qualifications
Food safety temperatures, recipe scaling, timed plans and evaluating practical outcomes overlap with GCSE Food and Nutrition, and costing, budgeting and customer feedback overlap with GCSE Business, so shared KS3 routines for scaling recipes and writing evaluations would serve all three.
Source: WJEC Level 1/Level 2 VCSE Hospitality and Catering specification, approved by Qualifications Wales, teaching from September 2027, for award from 2029 (© WJEC CBAC Ltd 2026).