LNF Cymru Literacy and numeracy for Wales

← All qualifications

Foundation Design and Technology

Foundation Design and Technology is a two year Entry Level and Level 1 course for learners aged 14 to 16, taken in Engineering Design, Fashion and Textiles or Product Design. Literacy runs through both units: the Unit 1 topic tests use objective and short answer questions full of technical vocabulary on safety, materials and processes, and the Unit 2 design project asks learners to analyse an existing product, write a design brief and specification, annotate and present ideas and evaluate their prototype. Numeracy is lighter and practical: setting sizes in the specification, measuring and drawing accurately, planning time across a 40 hour project and, in Engineering Design, knowing volts, amps and ohms. KS3 should build clear technical writing alongside accurate measuring in millimetres.

Awarding body
WJEC
Level
Entry Level and Level 1
First taught
September 2027
Amount of literacy work
Medium
Amount of numeracy work
Low
Specification
Open the specification
How this qualification is assessed
  • Unit 1: Design and Technology in the 21st Century: Three topic tests of 20 minutes each (1 hour in total): a Core Knowledge and Understanding test on health and safety (16 marks) and two pathway tests on Materials and Components and on Tools, Techniques and Processes (12 marks each), 40 marks, 30%, set and marked by WJEC, digital or paper format within a four week window
  • Unit 2: Design Project: Non-examination assessment, a sustained design and make task of approximately 40 hours based on a contextual challenge set by the centre, 60 marks, 70%, set and marked by the centre and moderated by WJEC

Skills that use Understanding, response and analysis

  1. Describing hazards, safety signs and safe working practices

    Assessed: In the exam

    All learners take a health and safety topic test covering PPE, safety signs and hazard symbols, manual handling and electrical safety. They must identify and describe hazards and safe working practices as part of risk assessment, reading signs and symbols and explaining them in words.

    Literacy: Understanding, response and analysis, Planning and organising for different purposes, audiences and context

    Getting pupils ready

    Year 7
    Pupils read the safety signs around the workshop and write what each one means and which colour group it belongs to.
    Year 8
    Pupils write a simple risk assessment for the pillar drill, describing two hazards and the safe working practice for each in full sentences.
    Year 9
    Pupils read a manufacturer's safety sheet for a hot glue gun or sewing machine and write a short risk assessment that names the hazards, who is at risk and how to work safely.
    Show the specification wording and the LNF statements

    Where it is in the specification: Unit 1, Section 1.1.1, page 12

    “Learners should be able to identify and describe risk assessment procedures”
    Progression step 3
    • I can read closely, identifying and noting features of texts, e.g. introduction, sequence, illustrations, formality, key vocabulary.

    • I can use and adapt different structures within my writing, e.g. reporting an event, investigation or experiment.

    Progression step 4
    • I can read closely, follow up and use additional material in texts to extend my understanding.

    • I can adapt my writing style, choosing and using the best structures for different contexts and purposes, e.g. to successfully describe, explain, persuade, discuss.

  2. Analysing existing products and the work of designers

    Assessed: In coursework (non-examination assessment, NEA)

    In Unit 2 learners explore and investigate existing products and the work of design professionals, and analyse and evaluate an existing product relevant to their own design work. This means reading product information and reviews and pulling out what matters for their own users.

    Literacy: Understanding, response and analysis

    Getting pupils ready

    Year 7
    Pupils look at an existing torch and its packaging and write down who it is for, what it does and what it is made from.
    Year 8
    Pupils read two product reviews of the same backpack and summarise what users like and dislike about it.
    Year 9
    Pupils analyse an existing product related to their project using the maker's website, reviews and their own handling of it, then write which features they will use or improve.
    Show the specification wording and the LNF statements

    Where it is in the specification: Unit 2, Section 2.1.1, page 20; Unit 2, Section 2.1.3, page 21

    “analyse and evaluate an existing product that is relevant to their own design work”
    Progression step 3
    • I can make use of reference/digital sources to select, summarise and synthesise information, referencing as appropriate.

    • I can collate and make connections, e.g. prioritising, categorising, between information and ideas from different sources including digital and audio-visual texts.

    Progression step 4
    • I can research a wide range of reference and digital sources to develop a full understanding of a topic or issue.

    • I can summarise, synthesise and analyse information to gain in-depth understanding, e.g. of causes, consequences, patterns, using different sources.

Good to know

Links with other qualifications

The specification says the qualification "provides a broad basis for progression onto GCSE Design and Technology" (page 8). The Foundation shares the GCSE's design brief, specification, annotation and evaluation writing and its technical vocabulary, but tests knowledge through short answer topic tests rather than extended written answers. GCSE Design and Technology steps up the numeracy, with measuring to tolerances, estimating material quantities, waste and costs, using collated data to set specification criteria, scale drawing and, in Engineering Design, mechanical and electronic calculations. Accurate measuring and unit work also link with GCSE Mathematics and Numeracy.

Source: WJEC Entry Level/Level 1 Foundation Design and Technology specification, approved by Qualifications Wales, teaching from September 2027, for award from 2029 (© WJEC CBAC Ltd 2026).