GCSE Design and Technology
Mae disgrifiad y cymhwyster yn Saesneg yn unig, gan ei fod wedi ei gymryd o fanyleb Saesneg CBAC.
Learners type short and extended answers in an on-screen examination. In a 40 hour design project worth 70% they write a design brief and specification, annotate and justify ideas, and evaluate their prototype using feedback from users. Numeracy is practical and constant: accurate measuring and marking out within tolerances in every pathway, costing and material estimates in Fashion and Textiles, and formula-based mechanical and electronic calculations in Engineering Design. The single biggest thing Key Stage 3 should build is precise measuring in millimetres against a stated tolerance, followed by a written evaluation that uses test results and user comments as evidence.
- Corff dyfarnu
- CBAC
- Lefel
- Level 1 and Level 2
- Addysgu gyntaf
- Medi 2026
- Faint o waith llythrennedd
- Canolig
- Faint o waith rhifedd
- Canolig
- Manyleb
- Agor y fanyleb
Sut mae'r cymhwyster hwn yn cael ei asesu
- Unit 1: Design and Technology in the 21st Century: Digital (on-screen) examination 1 hour 30 minutes, 30%, 80 marks
- Unit 2: Design Project: Non-examination assessment, approximately 40 hours, 70%, 100 marks
Sgiliau sy'n defnyddio Prawfddarllen, golygu a gwella
-
Writing design briefs and specifications, then annotating and justifying ideas
Learners write a design brief and a specification drawn from their own research, with qualitative and quantitative criteria. They then communicate, record and justify ideas through annotated sketches, written notes and presentations as the design develops.
Llythrennedd: Cynllunio a threfnu ar gyfer gwahanol ddibenion, cynulleidfaoedd a chyd-destunau, Prawfddarllen, golygu a gwella
Paratoi disgyblion
- Blwyddyn 7
- Pupils complete a scaffolded design brief for a desk tidy in three sentences, stating the user, the problem and what the product must do.
- Blwyddyn 8
- Pupils write a six-point specification for a phone holder, each point with a reason, then annotate two sketches to show which points each idea meets.
- Blwyddyn 9
- Pupils draft, redraft and finalise a brief and specification from their own user research, using teacher and peer feedback to make every point specific and testable.
Dangos geiriad y fanyleb a datganiadau'r Fframwaith Llythrennedd a Rhifedd
Ble mae yn y fanyleb: Unit 2, 2.1.3 and 2.1.4, pages 34 to 35
“write design briefs for specific needs, wants or interests”
Cam cynnydd 3
Rwy'n gallu ystyried ffyrdd gwahanol o gynllunio, drafftio a chyflwyno fy ngwaith yn briodol.
Rwy'n gallu defnyddio ac addasu gwahanol strwythurau yn fy ngwaith ysgrifennu, e.e. adroddiad ar ddigwyddiad, ymchwiliad neu arbrawf.
Rwy’n gallu myfyrio ar safon fy mynegiant, ei olygu a'i ailddrafftio i wella'r ansawdd, a defnyddio ystod o strategaethau i sicrhau mwy o eglurder.
Cam cynnydd 4
Rwy’n gallu dewis a defnyddio strategaethau priodol er mwyn cynllunio a datblygu fy ngwaith ysgrifennu at wahanol ddibenion ac ar gyfer gwahanol gynulleidfaoedd.
Rwy'n gallu trefnu a llunio fy ngwaith ysgrifennu'n effeithiol, gan gysylltu a datblygu fy syniadau ar gyfer amrywiaeth o wahanol gyd-destunau.
Rwy'n gallu gwella gwaith ysgrifennu drwy adolygu annibynnol ac ailddrafftio.
Cam cynnydd 5
Rwy'n gallu dewis a defnyddio strategaethau priodol i gynllunio a datblygu fy ngwaith ysgrifennu ar gyfer amrywiaeth heriol o wahanol ddibenion a chynulleidfaoedd.
Rwy'n gallu crynhoi gyda hyder, gan addasu arddull a ffurf yn ôl y darllenydd neu'r gynulleidfa fwriadedig a diben y gwaith ysgrifennu.
Rwy'n gallu gwella cynnwys, strwythur a chywirdeb fy ngwaith ysgrifennu drwy fyfyrio'n feirniadol, adolygu a golygu, gan ymateb yn adeiladol i adborth.
Da gwybod
- Unit 1 is typed on screen, not handwritten: "Digital examination: 1 hour 30 minutes" (Summary of assessment, page 4).
- The specification does not mention marks for spelling, punctuation and grammar. The four assessment objectives cover knowledge, application, developing designs and analysing and evaluating, and "The Assessment Pack will include all detailed information relating to assessment." (Assessment, page 43).
- The specification does not say whether a calculator is allowed in the on-screen examination, although Engineering Design learners must "calculate ohms law" (Unit 1, 1.1.9, page 17). Check the Assessment Pack.
- Formula-based calculations are for one pathway only: "This area of study is relevant to learners that have chosen Engineering Design as their pathway." (Unit 1, 1.1(a), page 14). Costing from standard fabric widths sits in Fashion and Textiles (Unit 1, 1.1.18, page 23).
- The design project is "Non-examination assessment: Approximately 40 hours", worth 70% and 100 marks (page 4). AO4, analyse and evaluate, is 20% of the qualification and is assessed only in Unit 2 (page 43).
- Written notes, presentations and mathematical modelling are listed "for example" (Unit 2, 2.1.4, pages 34 to 35), which the specification says "indicates that the specified content is for guidance only" (page 8). No word limits are stated.
Cysylltiadau â chymwysterau eraill
Ohm's law and moments overlap with The Sciences, gear ratios, scale drawing and tolerances with Mathematics and Numeracy, and product analysis and evaluative writing with English Language and Literature, so shared methods and vocabulary would help pupils.
Ffynhonnell: WJEC GCSE Design and Technology specification, Approved by Qualifications Wales, teaching from 2026, for award from 2028 (© WJEC CBAC Ltd 2025).