GCSE Design and Technology
Learners type short and extended answers in an on-screen examination. In a 40 hour design project worth 70% they write a design brief and specification, annotate and justify ideas, and evaluate their prototype using feedback from users. Numeracy is practical and constant: accurate measuring and marking out within tolerances in every pathway, costing and material estimates in Fashion and Textiles, and formula-based mechanical and electronic calculations in Engineering Design. The single biggest thing Key Stage 3 should build is precise measuring in millimetres against a stated tolerance, followed by a written evaluation that uses test results and user comments as evidence.
- Awarding body
- WJEC
- Level
- Level 1 and Level 2
- First taught
- September 2026
- Amount of literacy work
- Medium
- Amount of numeracy work
- Medium
- Specification
- Open the specification
How this qualification is assessed
- Unit 1: Design and Technology in the 21st Century: Digital (on-screen) examination 1 hour 30 minutes, 30%, 80 marks
- Unit 2: Design Project: Non-examination assessment, approximately 40 hours, 70%, 100 marks
Skills that use Connectives and syntax
-
Short and extended answers in the on-screen examination
Unit 1 mixes objective, short and extended questions, typed on screen. Learners must compare, explain and justify the suitability of materials, technologies and design decisions.
Literacy: Planning and organising for different purposes, audiences and context, Connectives and syntax
Getting pupils ready
- Year 7
- Pupils write a three-sentence answer explaining why pine was chosen for their Year 7 project, using the frame 'I chose... because... this means...'.
- Year 8
- Pupils compare acrylic and HIPS for a phone stand in a timed paragraph that uses 'whereas' and 'therefore', then check it against a model answer.
- Year 9
- Pupils type a timed extended answer on screen comparing two joining methods for a product, with a point, evidence and justification for each, marked against a GCSE-style mark scheme.
Show the specification wording and the LNF statements
Where it is in the specification: Summary of assessment, page 4; Unit 1, 1.1.6, page 14
“Questions requiring objective responses, short and extended answers assessing learners’ knowledge and understanding”
Progression step 3
I can write a comprehensive account of a topic, theme or viewpoint.
I can use paragraphs and make links between them.
I can use an increasing range of connectives to organise my ideas in sentences, paragraphs and whole texts.
Progression step 4
I can adapt my writing style, choosing and using the best structures for different contexts and purposes, e.g. to successfully describe, explain, persuade, discuss.
I can use summary, discussion of issues, detailed explanations and logic when covering a topic.
I can use a range of connectives specifically when organising my ideas in whole texts for different purposes.
Progression step 5
I can write extended pieces which include detailed evidence and information for different purposes and audiences within and across different disciplines.
I can organise writing in an appropriate form, ensuring content is detailed within and between paragraphs or sections, developing and sustaining ideas coherently.
I can vary sentence structures to engage and sustain the reader’s interest and write with grammatical accuracy.
Good to know
- Unit 1 is typed on screen, not handwritten: "Digital examination: 1 hour 30 minutes" (Summary of assessment, page 4).
- The specification does not mention marks for spelling, punctuation and grammar. The four assessment objectives cover knowledge, application, developing designs and analysing and evaluating, and "The Assessment Pack will include all detailed information relating to assessment." (Assessment, page 43).
- The specification does not say whether a calculator is allowed in the on-screen examination, although Engineering Design learners must "calculate ohms law" (Unit 1, 1.1.9, page 17). Check the Assessment Pack.
- Formula-based calculations are for one pathway only: "This area of study is relevant to learners that have chosen Engineering Design as their pathway." (Unit 1, 1.1(a), page 14). Costing from standard fabric widths sits in Fashion and Textiles (Unit 1, 1.1.18, page 23).
- The design project is "Non-examination assessment: Approximately 40 hours", worth 70% and 100 marks (page 4). AO4, analyse and evaluate, is 20% of the qualification and is assessed only in Unit 2 (page 43).
- Written notes, presentations and mathematical modelling are listed "for example" (Unit 2, 2.1.4, pages 34 to 35), which the specification says "indicates that the specified content is for guidance only" (page 8). No word limits are stated.
Links with other qualifications
Ohm's law and moments overlap with The Sciences, gear ratios, scale drawing and tolerances with Mathematics and Numeracy, and product analysis and evaluative writing with English Language and Literature, so shared methods and vocabulary would help pupils.
Source: WJEC GCSE Design and Technology specification, Approved by Qualifications Wales, teaching from 2026, for award from 2028 (© WJEC CBAC Ltd 2025).