GCSE Design and Technology
Learners type short and extended answers in an on-screen examination. In a 40 hour design project worth 70% they write a design brief and specification, annotate and justify ideas, and evaluate their prototype using feedback from users. Numeracy is practical and constant: accurate measuring and marking out within tolerances in every pathway, costing and material estimates in Fashion and Textiles, and formula-based mechanical and electronic calculations in Engineering Design. The single biggest thing Key Stage 3 should build is precise measuring in millimetres against a stated tolerance, followed by a written evaluation that uses test results and user comments as evidence.
- Awarding body
- WJEC
- Level
- Level 1 and Level 2
- First taught
- September 2026
- Amount of literacy work
- Medium
- Amount of numeracy work
- Medium
- Specification
- Open the specification
How this qualification is assessed
- Unit 1: Design and Technology in the 21st Century: Digital (on-screen) examination 1 hour 30 minutes, 30%, 80 marks
- Unit 2: Design Project: Non-examination assessment, approximately 40 hours, 70%, 100 marks
Skills that use Planning and organising for different purposes, audiences and context
-
Short and extended answers in the on-screen examination
Unit 1 mixes objective, short and extended questions, typed on screen. Learners must compare, explain and justify the suitability of materials, technologies and design decisions.
Literacy: Planning and organising for different purposes, audiences and context, Connectives and syntax
Getting pupils ready
- Year 7
- Pupils write a three-sentence answer explaining why pine was chosen for their Year 7 project, using the frame 'I chose... because... this means...'.
- Year 8
- Pupils compare acrylic and HIPS for a phone stand in a timed paragraph that uses 'whereas' and 'therefore', then check it against a model answer.
- Year 9
- Pupils type a timed extended answer on screen comparing two joining methods for a product, with a point, evidence and justification for each, marked against a GCSE-style mark scheme.
Show the specification wording and the LNF statements
Where it is in the specification: Summary of assessment, page 4; Unit 1, 1.1.6, page 14
“Questions requiring objective responses, short and extended answers assessing learners’ knowledge and understanding”
Progression step 3
I can write a comprehensive account of a topic, theme or viewpoint.
I can use paragraphs and make links between them.
I can use an increasing range of connectives to organise my ideas in sentences, paragraphs and whole texts.
Progression step 4
I can adapt my writing style, choosing and using the best structures for different contexts and purposes, e.g. to successfully describe, explain, persuade, discuss.
I can use summary, discussion of issues, detailed explanations and logic when covering a topic.
I can use a range of connectives specifically when organising my ideas in whole texts for different purposes.
Progression step 5
I can write extended pieces which include detailed evidence and information for different purposes and audiences within and across different disciplines.
I can organise writing in an appropriate form, ensuring content is detailed within and between paragraphs or sections, developing and sustaining ideas coherently.
I can vary sentence structures to engage and sustain the reader’s interest and write with grammatical accuracy.
-
Writing design briefs and specifications, then annotating and justifying ideas
Learners write a design brief and a specification drawn from their own research, with qualitative and quantitative criteria. They then communicate, record and justify ideas through annotated sketches, written notes and presentations as the design develops.
Literacy: Planning and organising for different purposes, audiences and context, Proofreading, editing and improving
Getting pupils ready
- Year 7
- Pupils complete a scaffolded design brief for a desk tidy in three sentences, stating the user, the problem and what the product must do.
- Year 8
- Pupils write a six-point specification for a phone holder, each point with a reason, then annotate two sketches to show which points each idea meets.
- Year 9
- Pupils draft, redraft and finalise a brief and specification from their own user research, using teacher and peer feedback to make every point specific and testable.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 2, 2.1.3 and 2.1.4, pages 34 to 35
“write design briefs for specific needs, wants or interests”
Progression step 3
I can explore different ways to plan, draft and present my work appropriately.
I can use and adapt different structures within my writing, e.g. reporting an event, investigation or experiment.
I can reflect on, edit and redraft to improve the quality of my expression, and use a range of strategies to ensure greater clarity.
Progression step 4
I can select and use appropriate strategies to plan and develop my writing for different purposes and audiences.
I can organise and construct my writing effectively, connecting and developing my ideas for a range of different contexts.
I can improve writing through independent review and redrafting.
Progression step 5
I can select and use appropriate strategies to plan and develop my writing for a challenging range of different purposes and audiences.
I can summarise confidently, adapting style and form for the reader or intended audience and purpose for writing.
I can improve the content, structure and accuracy of my writing through critical reflection, review and editing, responding constructively to feedback.
-
Evaluating the prototype and responding to feedback
Learners must make informed judgements about their own prototype, act on the views of others and clients, and suggest improvements and how they could be made. Analysing and evaluating (AO4) is worth 20% of the qualification, all of it in the design project.
Literacy: Planning and organising for different purposes, audiences and context, Listening to understand, Listening as part of collaborative talk, Questioning
Getting pupils ready
- Year 7
- Pupils test their finished product against three specification points and write 'what went well' and 'even better if' sentences with one reason each.
- Year 8
- Pupils ask a classmate to use their product, record two comments, and write a paragraph evaluation that quotes the comments and suggests one modification.
- Year 9
- Pupils interview a real user, such as a younger pupil or a teacher, about their prototype, then write an evaluation that weighs the feedback against the specification and explains how one named improvement would be made.
Show the specification wording and the LNF statements
Where it is in the specification: Unit 2, 2.1.6, page 35; Assessment objectives, page 43
“respond to feedback from others or clients and suggest improvements/modifications of their prototype.”
Progression step 3
I can adapt my writing style and structure to suit the audience, purpose and context, e.g. suitable balance between facts and viewpoints, a precise conclusion.
I can listen to others’ ideas/presentations, and understand that they may have a different perspective to my own, in order to respond appropriately.
I can listen to and respond to others with questions and comments which focus on reasons, implications and next steps.
Progression step 4
I can use summary, discussion of issues, detailed explanations and logic when covering a topic.
I can listen to gain different people's views and ideas on various subjects, using them to arrive at my own conclusions.
I can respond to others' points of view with confidence and sensitivity, summarising and evaluating what I have heard, read or seen.
Progression step 5
I can write extended pieces which include detailed evidence and information for different purposes and audiences within and across different disciplines.
I can listen to, critically evaluate and respect different people's perspectives, using them to arrive at my own considered conclusions.
I can respond with confidence and sensitivity to the ideas of others in different collaborative situations, reflecting on information and ideas and asking relevant questions.
Good to know
- Unit 1 is typed on screen, not handwritten: "Digital examination: 1 hour 30 minutes" (Summary of assessment, page 4).
- The specification does not mention marks for spelling, punctuation and grammar. The four assessment objectives cover knowledge, application, developing designs and analysing and evaluating, and "The Assessment Pack will include all detailed information relating to assessment." (Assessment, page 43).
- The specification does not say whether a calculator is allowed in the on-screen examination, although Engineering Design learners must "calculate ohms law" (Unit 1, 1.1.9, page 17). Check the Assessment Pack.
- Formula-based calculations are for one pathway only: "This area of study is relevant to learners that have chosen Engineering Design as their pathway." (Unit 1, 1.1(a), page 14). Costing from standard fabric widths sits in Fashion and Textiles (Unit 1, 1.1.18, page 23).
- The design project is "Non-examination assessment: Approximately 40 hours", worth 70% and 100 marks (page 4). AO4, analyse and evaluate, is 20% of the qualification and is assessed only in Unit 2 (page 43).
- Written notes, presentations and mathematical modelling are listed "for example" (Unit 2, 2.1.4, pages 34 to 35), which the specification says "indicates that the specified content is for guidance only" (page 8). No word limits are stated.
Links with other qualifications
Ohm's law and moments overlap with The Sciences, gear ratios, scale drawing and tolerances with Mathematics and Numeracy, and product analysis and evaluative writing with English Language and Literature, so shared methods and vocabulary would help pupils.
Source: WJEC GCSE Design and Technology specification, Approved by Qualifications Wales, teaching from 2026, for award from 2028 (© WJEC CBAC Ltd 2025).