VCSE Built Environment
Mae disgrifiad y cymhwyster yn Saesneg yn unig, gan ei fod wedi ei gymryd o fanyleb Saesneg CBAC.
VCSE Built Environment asks learners to read a Welsh case study and technical documents such as briefs and risk assessments, to justify choices of sites, methods and materials in writing, and to evaluate their own practical work using accurate trade terms. Its numeracy is mostly practical and sits in the 60% Unit 3, with accurate measuring to tolerances, reading plans and drawings, mixing to ratios and estimating quantities, alongside cost, time and carbon comparisons and project timelines in Unit 2. The single biggest thing KS3 should build is accurate measuring and marking out in millimetres from a drawing, checked against a stated tolerance.
- Corff dyfarnu
- CBAC
- Lefel
- Level 1 and Level 2
- Addysgu gyntaf
- Medi 2027
- Faint o waith llythrennedd
- Canolig
- Faint o waith rhifedd
- Canolig
- Manyleb
- Agor y fanyleb
- Y cam cyn hyn
- Foundation Built Environment, Entry Level and Level 1
Sut mae'r cymhwyster hwn yn cael ei asesu
- Unit 1: Introduction to the Built Environment Sector: Examination (sector test) 1 hour, 50 marks, 20%, set and marked by WJEC, paper-based or on-screen
- Unit 2: The Built Environment in Focus: NEA 6 hours 30 minutes, 50 marks, 20%, set and marked by WJEC, tasks based on a case study released each year on Portal
- Unit 3: Skills Development and Demonstration: NEA 14 hours, 90 marks, 60%, set by WJEC, marked by the centre and moderated by WJEC, practical tasks in three chosen trades plus an evaluation
Sgiliau sy'n defnyddio Datblygu geirfa
-
Using construction terminology accurately
Unit 1 tests a large technical vocabulary, from substructure and superstructure to retrofit, SIPS and portal frames. In the Unit 3 evaluation learners must describe the quality of their work using accurate trade terms such as bonding, cut-in, flush, plumb and setting out.
Llythrennedd: Geirfa, sillafu, gramadeg, Eglurder a geirfa, Datblygu geirfa
Paratoi disgyblion
- Blwyddyn 7
- Pupils build a picture glossary of ten parts of a house, such as foundation, lintel and ridge, and label a photo of a local terraced house with the correct terms.
- Blwyddyn 8
- Pupils describe a finished practical piece in five sentences using at least four trade terms such as flush, square, level and plumb, then check spellings against a word bank.
- Blwyddyn 9
- Pupils write a peer review of a classmate's practical work that uses accurate trade terms and refers to a stated tolerance, such as joints within 2 mm.
Dangos geiriad y fanyleb a datganiadau'r Fframwaith Llythrennedd a Rhifedd
Ble mae yn y fanyleb: Unit 3, Section 3.4.3, page 39; Unit 1, Sections 1.1.2 and 1.2.4, pages 13 to 16
“describing the quality of their work using accurate trade-specific terms”
Cam cynnydd 3
Rwy'n gallu defnyddio geirfa amrywiol, briodol a manwl gywir, gan gynnwys geiriau sy'n benodol i faes dysgu a phrofiad/disgyblaeth at ddibenion gwahanol.
Rwy'n gallu mynegi materion a syniadau'n glir gan ddefnyddio geirfa sy'n benodol i faes dysgu a phrofiad/disgyblaeth ac enghreifftiau.
Cam cynnydd 4
Rwyf wedi cael profiad o ystod o eirfa sy'n benodol i'r maes dysgu a phrofiad/disgyblaeth a geirfa academaidd gyffredinol, ac yn gallu ei defnyddio wrth i mi gyfathrebu.
Rwyf wedi cael profiad o ystod o eirfa sy'n benodol i faes dysgu a phrofiad/disgyblaeth a geirfa academaidd gyffredinol, ac yn gallu ei defnyddio wrth i mi gyfathrebu.
Rwy'n gallu defnyddio amrywiaeth o strategaethau ac adnoddau i sillafu geirfa gyfarwydd ac anghyfarwydd a geiriau sy'n benodol i faes dysgu a phrofiad/disgyblaeth yn gywir.
Cam cynnydd 5
Rwy'n gallu defnyddio ystod o eirfa sy'n benodol i ddisgyblaeth a geirfa academaidd gyffredinol yn fanwl gywir.
Rwy'n gallu defnyddio strategaethau i sillafu geiriau sy'n benodol i ddisgyblaeth a geiriau academaidd cyffredinol mewn cyd-destunau priodol.
Rwy'n gallu defnyddio ystod o eirfa sy'n benodol i ddisgyblaeth a geirfa academaidd gyffredinol wrth i mi gyfathrebu.
Da gwybod
- No marks for spelling, punctuation and grammar are named. All marks sit under AO1 to AO4, and AO4, "Demonstrate and apply skills relevant to the built environment sector", is 60% of the qualification (Section 3.1, page 41).
- Calculator use is not stated. Section 3 says "The Assessment Pack will include all detailed information relating to assessment" (page 41), so check the Assessment Pack for Unit 1 and Unit 2.
- The Unit 3 evaluation can be spoken: it may be submitted "either as scanned handwritten responses, completed electronically or completed as an audio or audio/visual response" (Section 3.2, page 43).
- Unit 2 gives reading and research time: "Learners are allowed time to read the case study and tasks prior to the assessment time starting" and up to two further hours can be scheduled for research (Section 3.2, page 42).
- During NEA "Teachers may clarify task requirements but must not provide feedback on the evidence being produced" (Section 3.3, page 43).
- Appendix A maps writing in Unit 3 only to topic 3.4, and maps the statistics strand to Unit 1 (1.2.3) and Unit 2 but not to Unit 3 (pages 49 to 50).
Cysylltiadau â chymwysterau eraill
Measuring to tolerances, reading scale plans and working out quantities overlap with GCSE Design and Technology and Mathematics and Numeracy, and land use, population and housing need overlap with GCSE Geography.
Ffynhonnell: WJEC Level 1/Level 2 VCSE Built Environment specification, approved by Qualifications Wales, teaching from September 2027, for award from 2029 (© WJEC CBAC Ltd 2026).