VCSE Built Environment
Mae disgrifiad y cymhwyster yn Saesneg yn unig, gan ei fod wedi ei gymryd o fanyleb Saesneg CBAC.
VCSE Built Environment asks learners to read a Welsh case study and technical documents such as briefs and risk assessments, to justify choices of sites, methods and materials in writing, and to evaluate their own practical work using accurate trade terms. Its numeracy is mostly practical and sits in the 60% Unit 3, with accurate measuring to tolerances, reading plans and drawings, mixing to ratios and estimating quantities, alongside cost, time and carbon comparisons and project timelines in Unit 2. The single biggest thing KS3 should build is accurate measuring and marking out in millimetres from a drawing, checked against a stated tolerance.
- Corff dyfarnu
- CBAC
- Lefel
- Level 1 and Level 2
- Addysgu gyntaf
- Medi 2027
- Faint o waith llythrennedd
- Canolig
- Faint o waith rhifedd
- Canolig
- Manyleb
- Agor y fanyleb
- Y cam cyn hyn
- Foundation Built Environment, Entry Level and Level 1
Sut mae'r cymhwyster hwn yn cael ei asesu
- Unit 1: Introduction to the Built Environment Sector: Examination (sector test) 1 hour, 50 marks, 20%, set and marked by WJEC, paper-based or on-screen
- Unit 2: The Built Environment in Focus: NEA 6 hours 30 minutes, 50 marks, 20%, set and marked by WJEC, tasks based on a case study released each year on Portal
- Unit 3: Skills Development and Demonstration: NEA 14 hours, 90 marks, 60%, set by WJEC, marked by the centre and moderated by WJEC, practical tasks in three chosen trades plus an evaluation
Sgiliau sy'n defnyddio Y system rif
-
Measuring, marking out and working to tolerances
Learners must measure and mark out accurately with tools such as a tape measure, spirit level, chalk line or laser level, and follow dimensions and tolerances in every trade activity. Work must be level, plumb and square, and is checked at each stage to find and correct errors.
Rhifedd: Mesur, Ongl, Y system rif, Cymhwysedd strategol, Cyfathrebu â symbolau
Paratoi disgyblion
- Blwyddyn 7
- Pupils measure and mark a piece of card or timber to the nearest millimetre with a steel rule, then check a partner's marks.
- Blwyddyn 8
- Pupils use a spirit level and tape measure to check whether shelves and window sills around school are level, recording readings in millimetres and converting them to centimetres and metres.
- Blwyddyn 9
- Pupils make a simple frame from a drawing with a tolerance of plus or minus 2 mm, measure the finished piece, and record whether each dimension is within the upper and lower limits.
Dangos geiriad y fanyleb a datganiadau'r Fframwaith Llythrennedd a Rhifedd
Ble mae yn y fanyleb: Unit 3, Section 3.3.1, page 37; Section 3.2.2, page 36
“follow instructions, dimensions, and tolerances accurately in all practical trade activities”
Cam cynnydd 3
Rwy'n gallu darllen a dehongli graddfeydd neu raniadau ar amrywiaeth o offerynnau mesur.
Rwy'n gallu cofnodi mesuriadau mewn ffyrdd gwahanol, e.e. 1.3kg = 1kg 300g, 4.2cm = 4cm 2mm.
Rwy'n gallu trosi unedau metrig o hyd i unedau llai, e.e. cm i mm, m i cm, km i m.
Cam cynnydd 4
Rwy'n gallu darllen a dehongli graddfeydd ar amrywiaeth o offerynnau mesur.
Rwy'n gallu defnyddio'r unedau mesur cyffredin, trosi rhwng unedau cysylltiedig y system fetrig a chwblhau cyfrifiadau.
Rwy'n gallu mesur a lluniadu onglau.
Cam cynnydd 5
Rwy'n gallu adnabod a diffinio cyfyngiadau ar gywirdeb mesuriadau, e.e. ffiniau uchaf ac isaf.
Rwy'n gallu nodi, mesur neu gasglu'r wybodaeth sy'n ofynnol er mwyn cwblhau'r dasg.
Rwy'n gallu defnyddio nodiant, symbolau ac unedau mesur priodol, gan gynnwys mesurau cyfansawdd.
-
Estimating quantities and ordering accurately to cut waste
Unit 1 covers the need to reduce waste through accurate ordering and reusing unused materials, and Unit 3 asks learners to minimise waste and plan layouts, such as marking out tiles to minimise cuts. This rests on area, quantity and rounding up to whole units.
Rhifedd: Siâp a gofod, Y system rif, Cymhwysedd strategol, Dealltwriaeth gysyniadol
Paratoi disgyblion
- Blwyddyn 7
- Pupils measure a noticeboard, calculate its area and work out how many A4 sheets would cover it.
- Blwyddyn 8
- Pupils calculate the area of a classroom wall less the door and window, and work out how many 2.5 litre tins of paint are needed for two coats, rounding up.
- Blwyddyn 9
- Pupils plan the tiles for a kitchen splashback, add 10% for cuts and breakages, and compare the cost of ordering the exact number with ordering whole boxes.
Dangos geiriad y fanyleb a datganiadau'r Fframwaith Llythrennedd a Rhifedd
Ble mae yn y fanyleb: Unit 1, Section 1.2.2, page 15; Unit 3, Sections 3.1.8 and 3.3.2, pages 33 and 37
“the need to reduce the amount of waste produced through accurate ordering”
Cam cynnydd 3
Rwy'n gallu dod o hyd i arwynebedd drwy gyfrif sgwariau, gan ddatblygu i gyfrifo arwynebedd sgwariau a phetryalau drwy ddefnyddio fformiwlâu.
Rwy'n gallu amcangyfrif drwy dalgrynnu i'r 10, 100, 1000 neu'r rhif cyfan agosaf.
Cam cynnydd 4
Rwy'n gallu cyfrifo arwynebedd siapiau dau ddimensiwn syml a chyfansawdd, gan gynnwys cylchoedd.
Rwy'n gallu gwneud a chyfiawnhau amcangyfrifon a brasamcanion cyfrifiadau.
Cam cynnydd 5
Rwy'n gallu dewis, treialu a gwerthuso amrywiaeth o ddulliau posibl a rhannu problemau cymhleth yn gyfres o dasgau.
Rwy'n gallu dehongli atebion o fewn cyd-destun y broblem ac ystyried a yw atebion, gan gynnwys dangosyddion cyfrifiannell, analog a digidol, yn synhwyrol.
Da gwybod
- No marks for spelling, punctuation and grammar are named. All marks sit under AO1 to AO4, and AO4, "Demonstrate and apply skills relevant to the built environment sector", is 60% of the qualification (Section 3.1, page 41).
- Calculator use is not stated. Section 3 says "The Assessment Pack will include all detailed information relating to assessment" (page 41), so check the Assessment Pack for Unit 1 and Unit 2.
- The Unit 3 evaluation can be spoken: it may be submitted "either as scanned handwritten responses, completed electronically or completed as an audio or audio/visual response" (Section 3.2, page 43).
- Unit 2 gives reading and research time: "Learners are allowed time to read the case study and tasks prior to the assessment time starting" and up to two further hours can be scheduled for research (Section 3.2, page 42).
- During NEA "Teachers may clarify task requirements but must not provide feedback on the evidence being produced" (Section 3.3, page 43).
- Appendix A maps writing in Unit 3 only to topic 3.4, and maps the statistics strand to Unit 1 (1.2.3) and Unit 2 but not to Unit 3 (pages 49 to 50).
Cysylltiadau â chymwysterau eraill
Measuring to tolerances, reading scale plans and working out quantities overlap with GCSE Design and Technology and Mathematics and Numeracy, and land use, population and housing need overlap with GCSE Geography.
Ffynhonnell: WJEC Level 1/Level 2 VCSE Built Environment specification, approved by Qualifications Wales, teaching from September 2027, for award from 2029 (© WJEC CBAC Ltd 2026).