LNF Cymru Llythrennedd a rhifedd i Gymru

← Pob cymhwyster

Foundation Engineering

Mae disgrifiad y cymhwyster yn Saesneg yn unig, gan ei fod wedi ei gymryd o fanyleb Saesneg CBAC.

Foundation Engineering is a two-year Entry Level to Level 1 work-related qualification for learners in Years 10 and 11, leading on to VCSE Engineering. Literacy sits mostly in Unit 1, where learners name, outline, describe and explain engineering roles, tools, processes and safety rules through talks, presentations, short reports and matching tasks, and in Unit 2, where they read risk assessments, write a task plan, record results and report faults. Numeracy sits in the Unit 2 workshop: reading dimensions and angles on drawings, marking out, measuring with steel rules, vernier callipers and micrometers, and working to tolerances that tighten from plus or minus 2 mm at Entry 1 to plus or minus 0.8 mm at Level 1. There are no formulae or written tests.

Corff dyfarnu
CBAC
Lefel
Entry Level and Level 1
Addysgu gyntaf
Medi 2027
Faint o waith llythrennedd
Canolig
Faint o waith rhifedd
Canolig
Manyleb
Agor y fanyleb
Y cam nesaf i fyny
VCSE Engineering, Level 1 and Level 2
Sut mae'r cymhwyster hwn yn cael ei asesu
  • Unit 1: Introduction to Engineering: Centre marked non-examination assessment, portfolio of evidence, maximum assessment time 9 hours (typically 7 to 9 hours), 36 guided learning hours, 48 points of the 112 qualification points, teacher-set tasks assessed in centre and moderated by WJEC, first available summer 2028
  • Unit 2: Producing a Product: Centre marked non-examination assessment, portfolio of evidence, maximum assessment time 21 hours (typically 19 to 21 hours), 84 guided learning hours, 64 points of the 112 qualification points, teacher-set practical workshop tasks assessed in centre and moderated by WJEC, first available summer 2029

Sgiliau sy'n defnyddio Geirfa, sillafu, gramadeg

  1. Using engineering vocabulary for tools, processes and safety

    Asesu: Mewn gwaith cwrs (asesiad di-arholiad)

    Unit 1 is full of technical terms: centre punch, scriber, tap and die, vernier calliper, pop rivets, anodising, metal inert gas welding, and legislation such as COSHH and the Health and Safety at Work Act. Learners use these names to state, outline and explain purposes in their portfolio, including cloze tasks at Entry 3.

    Llythrennedd: Geirfa, sillafu, gramadeg, Eglurder a geirfa

    Paratoi disgyblion

    Blwyddyn 7
    Pupils label photos of workshop tools such as a scriber, centre punch, engineer's square and file, and learn the spellings in a weekly word check.
    Blwyddyn 8
    Pupils complete cloze sentences about measuring tools, such as a micrometer is used to measure small sizes accurately, using a word bank.
    Blwyddyn 9
    Pupils write their own one sentence definitions of COSHH, PPE, anodising and pop riveting and use each term correctly in a short safety talk.
    Dangos geiriad y fanyleb a datganiadau'r Fframwaith Llythrennedd a Rhifedd

    Ble mae yn y fanyleb: Unit 1, Sections 1.3.1, 1.3.2 and 1.4.4, pages 15 and 17; Unit 1, LO1.3 example tasks, page 25

    “the learner completes cloze statements describing the purpose”
    Cam cynnydd 3
    • Rwy'n gallu defnyddio geirfa amrywiol, briodol a manwl gywir, gan gynnwys geiriau sy'n benodol i faes dysgu a phrofiad/disgyblaeth at ddibenion gwahanol.

    • Rwy'n gallu defnyddio strategaethau i sillafu geiriau amlsillafog, cymhleth ac afreolaidd yng nghyd-destun pob maes dysgu a phrofiad.

    • Rwy'n gallu mynegi materion a syniadau'n glir gan ddefnyddio geirfa sy'n benodol i faes dysgu a phrofiad/disgyblaeth ac enghreifftiau.

    Cam cynnydd 4
    • Rwyf wedi cael profiad o ystod o eirfa sy'n benodol i faes dysgu a phrofiad/disgyblaeth a geirfa academaidd gyffredinol, ac yn gallu ei defnyddio wrth i mi gyfathrebu.

    • Rwy'n gallu defnyddio amrywiaeth o strategaethau ac adnoddau i sillafu geirfa gyfarwydd ac anghyfarwydd a geiriau sy'n benodol i faes dysgu a phrofiad/disgyblaeth yn gywir.

    • Rwyf wedi cael profiad o ystod o eirfa sy'n benodol i faes dysgu a phrofiad/disgyblaeth a geirfa academaidd gyffredinol, ac yn gallu ei defnyddio wrth i mi gyfathrebu.

Da gwybod

Cysylltiadau â chymwysterau eraill

Foundation Engineering is the step below VCSE Engineering, which the specification names as a progression route. Both ask learners to read drawings, measure with vernier callipers and micrometers, work to tolerances, write a plan and risk assessment, record results and suggest improvements. VCSE Engineering steps these up with closer tolerances judged against full engineering drawings, unit conversions, area, volume and waste, spindle speed and Ohm's law calculations in a one hour written test, and reading a case study on an engineering project in Wales. The measuring and recording work also links with GCSE Mathematics and Numeracy and GCSE Design and Technology, and the talks and reports build on GCSE English Language and Literature skills.

Ffynhonnell: WJEC Entry Level/Level 1 Foundation Engineering specification, approved by Qualifications Wales, teaching from September 2027, for award from 2029 (© WJEC CBAC Ltd 2026).