VCSE Engineering
Mae disgrifiad y cymhwyster yn Saesneg yn unig, gan ei fod wedi ei gymryd o fanyleb Saesneg CBAC.
VCSE Engineering asks learners to read engineering drawings and technical sources closely, use precise technical vocabulary, write an operations plan and risk assessment, report faults and evaluate the quality of their own work, while the Unit 1 tasks ask them to read a case study and weigh the benefits and challenges of an engineering project in Wales. Numeracy runs through every unit: measuring to tolerances with callipers and micrometers, finding missing dimensions and angles on drawings, converting units, and calculating area, volume, waste, feeds and speeds and Ohm's law, much of it tested in the one hour Unit 3 written test. The single biggest thing KS3 should build is accurate measuring in millimetres against a stated tolerance, together with the confidence to use a formula such as spindle speed or Ohm's law with the right units.
- Corff dyfarnu
- CBAC
- Lefel
- Level 1 and Level 2
- Addysgu gyntaf
- Medi 2027
- Faint o waith llythrennedd
- Canolig
- Faint o waith rhifedd
- Uchel
- Manyleb
- Agor y fanyleb
- Y cam cyn hyn
- Foundation Engineering, Entry Level and Level 1
Sut mae'r cymhwyster hwn yn cael ei asesu
- Unit 1: Introduction to the Engineering Sector: Non-examination assessment 8 hours, 20%, 40 marks, set and marked by WJEC, available via Portal
- Unit 2: Applying Engineering Processes: Non-examination assessment 26 hours, 60%, 145 marks, set by WJEC, marked by the centre and moderated by WJEC
- Unit 3: Engineering Principles: Written test 1 hour, 20%, 60 marks, set and marked by WJEC, paper format only
Sgiliau sy'n defnyddio Diben
-
Reporting faults and safety issues clearly
During shut-down learners inspect tools, machines and PPE for wear or damage and must report any issues appropriately. Appendix A maps speaking to planning, risk assessment, machining and evaluation in Unit 2, and performance evidence is recorded on observation records.
Llythrennedd: Eglurder a geirfa, Diben
Paratoi disgyblion
- Blwyddyn 7
- At the end of a practical lesson pupils tell the technician about any blunt or damaged tool, using its correct name and saying what is wrong.
- Blwyddyn 8
- Pupils give a 30 second safety briefing on the pillar drill to a small group, naming the guard, the emergency stop and the PPE needed.
- Blwyddyn 9
- In a practice shut-down check pupils inspect a machine and its tools, then report a planted fault aloud and on a fault log, stating where it is, what is wrong and what action they took.
Dangos geiriad y fanyleb a datganiadau'r Fframwaith Llythrennedd a Rhifedd
Ble mae yn y fanyleb: Unit 2, Section 2.4.1, page 26; Section 3.3, page 40; Appendix A, page 45
“Learners should be able to report any issues appropriately.”
Cam cynnydd 3
Rwy'n gallu mynegi materion a syniadau'n glir gan ddefnyddio geirfa sy'n benodol i faes dysgu a phrofiad/disgyblaeth ac enghreifftiau.
Rwy'n gallu trefnu sgwrs fel y gall gwahanol gynulleidfaoedd mewn gwahanol gyd-destunau ddilyn yr hyn sy'n cael ei ddweud, gan gynnwys defnyddio iaith ffurfiol.
Cam cynnydd 4
Rwy’n gallu siarad yn glir, gan ddewis ac addasu fy iaith yn briodol ar gyfer ystod o gynulleidfaoedd a dibenion, a chan gyfleu ystyr yn effeithiol i’r gynulleidfa.
Rwyf wedi cael profiad o ystod o eirfa sy'n benodol i faes dysgu a phrofiad/disgyblaeth a geirfa academaidd gyffredinol, ac yn gallu ei defnyddio wrth i mi gyfathrebu.
Cam cynnydd 5
Rwy'n gallu cyflwyno syniadau a materion er mwyn bodloni gofynion gwahanol gynulleidfaoedd.
Rwy'n gallu defnyddio ystod o eirfa sy'n benodol i ddisgyblaeth a geirfa academaidd gyffredinol wrth i mi gyfathrebu.
Da gwybod
- Numeracy is named in the content itself: learners use "applying numeracy skills to calculate or determine missing or incorrect dimensions where required" (Unit 2, Section 2.1.1, page 19), and Unit 3 lists "GCSE Mathematics and Numeracy" as a linked qualification (page 28).
- No marks for spelling, punctuation and grammar are mentioned. All marks sit under AO1 to AO4 (Section 3.1, page 37), and "The Assessment Pack will include all detailed information relating to assessment." (page 37).
- Calculator use is not stated, although Unit 3 includes feeds and speeds and Ohm's law calculations and "Unit 3 is a written test, available in paper format only." (page 5). Check the Assessment Pack.
- NEA writing may be handwritten: evidence "must be submitted digitally, either as scanned handwritten responses or completed digitally." (page 38).
- Spoken and practical work is evidenced by the teacher: "performance evidence (for example, presentations) must be documented using observation records" (Section 3.3, page 40).
- Appendix A (pages 45 to 47) maps literacy to all three units but the numeracy statistics strand to Unit 1 only, and it lists section "3.4.5" (page 47), which does not exist in the content.
Cysylltiadau â chymwysterau eraill
Measuring to tolerances, unit conversions, area and volume and Ohm's law overlap with Mathematics and Numeracy, The Sciences and GCSE Design and Technology. Reading drawings, risk assessments and sector case studies in Wales are shared with VCSE Built Environment.
Ffynhonnell: WJEC Level 1/Level 2 VCSE Engineering specification, approved by Qualifications Wales, teaching from September 2027, for award from 2029 (© WJEC CBAC Ltd 2026).