VCSE Engineering
Mae disgrifiad y cymhwyster yn Saesneg yn unig, gan ei fod wedi ei gymryd o fanyleb Saesneg CBAC.
VCSE Engineering asks learners to read engineering drawings and technical sources closely, use precise technical vocabulary, write an operations plan and risk assessment, report faults and evaluate the quality of their own work, while the Unit 1 tasks ask them to read a case study and weigh the benefits and challenges of an engineering project in Wales. Numeracy runs through every unit: measuring to tolerances with callipers and micrometers, finding missing dimensions and angles on drawings, converting units, and calculating area, volume, waste, feeds and speeds and Ohm's law, much of it tested in the one hour Unit 3 written test. The single biggest thing KS3 should build is accurate measuring in millimetres against a stated tolerance, together with the confidence to use a formula such as spindle speed or Ohm's law with the right units.
- Corff dyfarnu
- CBAC
- Lefel
- Level 1 and Level 2
- Addysgu gyntaf
- Medi 2027
- Faint o waith llythrennedd
- Canolig
- Faint o waith rhifedd
- Uchel
- Manyleb
- Agor y fanyleb
- Y cam cyn hyn
- Foundation Engineering, Entry Level and Level 1
Sut mae'r cymhwyster hwn yn cael ei asesu
- Unit 1: Introduction to the Engineering Sector: Non-examination assessment 8 hours, 20%, 40 marks, set and marked by WJEC, available via Portal
- Unit 2: Applying Engineering Processes: Non-examination assessment 26 hours, 60%, 145 marks, set by WJEC, marked by the centre and moderated by WJEC
- Unit 3: Engineering Principles: Written test 1 hour, 20%, 60 marks, set and marked by WJEC, paper format only
Sgiliau sy'n defnyddio Cynllunio a threfnu ar gyfer gwahanol ddibenion, cynulleidfaoedd a chyd-destunau
-
Writing an operations plan and risk assessment
Learners write a plan of their engineering operations that details technical information, time frames, priorities and the sequence of processes, and a risk assessment that sets out risks, control measures and revised risk levels. Both are clear procedural writing that the learner then has to follow safely in Unit 2.
Llythrennedd: Cynllunio a threfnu ar gyfer gwahanol ddibenion, cynulleidfaoedd a chyd-destunau
Paratoi disgyblion
- Blwyddyn 7
- Pupils write numbered instructions for safely marking out and cutting a piece of acrylic, using command verbs and sequence words.
- Blwyddyn 8
- Pupils write a risk assessment table for the pillar drill, describing each hazard, risk and control measure in a clear full sentence.
- Blwyddyn 9
- Pupils write a full operations plan for a small project with technical detail, timings and quality checks, then redraft it after a partner tries to follow it and marks anything unclear.
Dangos geiriad y fanyleb a datganiadau'r Fframwaith Llythrennedd a Rhifedd
Ble mae yn y fanyleb: Unit 2, Sections 2.2.1 and 2.2.3, pages 20 and 21
“plan the engineering operations, including:”
Cam cynnydd 3
Rwy'n gallu defnyddio ac addasu gwahanol strwythurau yn fy ngwaith ysgrifennu, e.e. adroddiad ar ddigwyddiad, ymchwiliad neu arbrawf.
Rwy'n gallu ystyried ffyrdd gwahanol o gynllunio, drafftio a chyflwyno fy ngwaith yn briodol.
Cam cynnydd 4
Rwy’n gallu dewis a defnyddio strategaethau priodol er mwyn cynllunio a datblygu fy ngwaith ysgrifennu at wahanol ddibenion ac ar gyfer gwahanol gynulleidfaoedd.
Rwy'n gallu addasu fy arddull ysgrifennu, gan ddewis a defnyddio'r strwythurau gorau ar gyfer gwahanol gyd-destunau a dibenion, e.e. i ddisgrifio, esbonio, darbwyllo, trafod yn llwyddiannus.
Cam cynnydd 5
Rwy'n gallu dewis a defnyddio strategaethau priodol i gynllunio a datblygu fy ngwaith ysgrifennu ar gyfer amrywiaeth heriol o wahanol ddibenion a chynulleidfaoedd.
Rwy'n gallu trefnu gwaith ysgrifennu ar ffurf briodol, gan sicrhau bod y cynnwys yn cael ei nodi o fewn a rhwng paragraffau neu adrannau, a chan ddatblygu a chynnal syniadau'n gydlynus.
-
Evaluating quality and suggesting improvements in writing
Learners evaluate the quality of their components against drawing tolerances, judge how well their chosen processes worked and whether they finished in the planned time, and suggest realistic improvements. This evaluation sits in the Unit 2 tasks, where AO3, interpreting and evaluating, carries 10% of the qualification.
Llythrennedd: Cynllunio a threfnu ar gyfer gwahanol ddibenion, cynulleidfaoedd a chyd-destunau, Cysyllteiriau a chystrawen
Paratoi disgyblion
- Blwyddyn 7
- Pupils write three sentences about their finished project: one thing that went well, one that did not, and what they would do differently next time.
- Blwyddyn 8
- Pupils write a paragraph evaluating their part using measurements as evidence and connectives such as because, however and as a result.
- Blwyddyn 9
- Pupils write a structured evaluation with sections on accuracy, finish, process choice and time, ending with two realistic improvements that each name a process, tool or material.
Dangos geiriad y fanyleb a datganiadau'r Fframwaith Llythrennedd a Rhifedd
Ble mae yn y fanyleb: Unit 2, Sections 2.4.2 and 2.4.3, page 26; Section 3.1, page 37
“how to suggest realistic improvements that would benefit”
Cam cynnydd 3
Rwy'n gallu defnyddio ac addasu gwahanol strwythurau yn fy ngwaith ysgrifennu, e.e. adroddiad ar ddigwyddiad, ymchwiliad neu arbrawf.
Rwy'n gallu defnyddio amrywiaeth gynyddol o gysyllteiriau i drefnu fy syniadau mewn brawddegau, paragraffau a thestunau cyfan.
Cam cynnydd 4
Rwy'n gallu defnyddio crynodebau, trafod materion, rhoi esboniadau manwl a defnyddio rhesymeg wrth ymdrin â phwnc.
Rwy'n gallu defnyddio amrywiaeth o gysyllteiriau'n benodol wrth drefnu fy syniadau yn destunau cyfan at wahanol ddibenion.
Cam cynnydd 5
Rwy'n gallu ysgrifennu darnau estynedig sy'n cynnwys tystiolaeth a gwybodaeth fanwl at wahanol ddibenion ac ar gyfer gwahanol gynulleidfaoedd o fewn gwahanol ddisgyblaethau a rhyngddyn nhw.
Rwy'n gallu cyfleu safbwynt gwrthrychol a diduedd ar bynciau cymhleth, gan ddefnyddio ystod o ddyfeisiau ieithyddol.
-
Reading a case study and weighing the benefits and challenges of an engineering project
Unit 1 tasks are based on a sector and a case study chosen by WJEC, and learners must understand the potential benefits and challenges of an engineering initiative, project or operation in Wales. They read and research, then write about factors such as economic value, environmental impact, budget and stakeholder conflict.
Llythrennedd: Deall, ymateb a dadansoddi, Cynllunio a threfnu ar gyfer gwahanol ddibenion, cynulleidfaoedd a chyd-destunau
Paratoi disgyblion
- Blwyddyn 7
- Pupils read a short news article about a local engineering project, such as a new bridge or wind farm, and list two benefits and two challenges in their own words.
- Blwyddyn 8
- Pupils read two short texts about a proposed factory in their area, one from the company and one from local residents, and write a paragraph on benefits and a paragraph on challenges.
- Blwyddyn 9
- Pupils work through a short case study pack on an engineering project in Wales and write a balanced answer judging whether the benefits outweigh the challenges, quoting evidence from the pack.
Dangos geiriad y fanyleb a datganiadau'r Fframwaith Llythrennedd a Rhifedd
Ble mae yn y fanyleb: Unit 1, Section 1.1.3, page 14; Section 3.2, page 37
“potential challenges of an initiative/project/operation”
Cam cynnydd 3
Rwy'n gallu dangos fy mod yn deall y prif syniadau a manylion pwysig mewn gwahanol destunau ar yr un pwnc a'u defnyddio.
Rwy'n gallu ysgrifennu cyflwyniad effeithiol sy'n nodi'r cyd-destun a'r diben, gan gynnwys cydbwysedd addas rhwng ffeithiau a safbwyntiau, a chasgliad penodol.
Cam cynnydd 4
Rwy'n gallu crynhoi, cyfuno a dadansoddi gwybodaeth er mwyn magu dealltwriaeth fanwl, e.e. o achosion, canlyniadau, patrymau, gan ddefnyddio gwahanol ffynonellau.
Rwy'n gallu defnyddio crynodebau, trafod materion, rhoi esboniadau manwl a defnyddio rhesymeg wrth ymdrin â phwnc.
Cam cynnydd 5
Rwy'n gallu cyfuno a dadansoddi gwybodaeth er mwyn magu dealltwriaeth eang a chytbwys o ffynonellau a allai gynnwys safbwyntiau croes.
Rwy'n gallu cyfleu safbwynt gwrthrychol a diduedd ar bynciau cymhleth, gan ddefnyddio ystod o ddyfeisiau ieithyddol.
Da gwybod
- Numeracy is named in the content itself: learners use "applying numeracy skills to calculate or determine missing or incorrect dimensions where required" (Unit 2, Section 2.1.1, page 19), and Unit 3 lists "GCSE Mathematics and Numeracy" as a linked qualification (page 28).
- No marks for spelling, punctuation and grammar are mentioned. All marks sit under AO1 to AO4 (Section 3.1, page 37), and "The Assessment Pack will include all detailed information relating to assessment." (page 37).
- Calculator use is not stated, although Unit 3 includes feeds and speeds and Ohm's law calculations and "Unit 3 is a written test, available in paper format only." (page 5). Check the Assessment Pack.
- NEA writing may be handwritten: evidence "must be submitted digitally, either as scanned handwritten responses or completed digitally." (page 38).
- Spoken and practical work is evidenced by the teacher: "performance evidence (for example, presentations) must be documented using observation records" (Section 3.3, page 40).
- Appendix A (pages 45 to 47) maps literacy to all three units but the numeracy statistics strand to Unit 1 only, and it lists section "3.4.5" (page 47), which does not exist in the content.
Cysylltiadau â chymwysterau eraill
Measuring to tolerances, unit conversions, area and volume and Ohm's law overlap with Mathematics and Numeracy, The Sciences and GCSE Design and Technology. Reading drawings, risk assessments and sector case studies in Wales are shared with VCSE Built Environment.
Ffynhonnell: WJEC Level 1/Level 2 VCSE Engineering specification, approved by Qualifications Wales, teaching from September 2027, for award from 2029 (© WJEC CBAC Ltd 2026).