LNF Cymru Literacy and numeracy for Wales

← All qualifications

VCSE Engineering

VCSE Engineering asks learners to read engineering drawings and technical sources closely, use precise technical vocabulary, write an operations plan and risk assessment, report faults and evaluate the quality of their own work, while the Unit 1 tasks ask them to read a case study and weigh the benefits and challenges of an engineering project in Wales. Numeracy runs through every unit: measuring to tolerances with callipers and micrometers, finding missing dimensions and angles on drawings, converting units, and calculating area, volume, waste, feeds and speeds and Ohm's law, much of it tested in the one hour Unit 3 written test. The single biggest thing KS3 should build is accurate measuring in millimetres against a stated tolerance, together with the confidence to use a formula such as spindle speed or Ohm's law with the right units.

Awarding body
WJEC
Level
Level 1 and Level 2
First taught
September 2027
Amount of literacy work
Medium
Amount of numeracy work
High
Specification
Open the specification
Step before
Foundation Engineering, Entry Level and Level 1
How this qualification is assessed
  • Unit 1: Introduction to the Engineering Sector: Non-examination assessment 8 hours, 20%, 40 marks, set and marked by WJEC, available via Portal
  • Unit 2: Applying Engineering Processes: Non-examination assessment 26 hours, 60%, 145 marks, set by WJEC, marked by the centre and moderated by WJEC
  • Unit 3: Engineering Principles: Written test 1 hour, 20%, 60 marks, set and marked by WJEC, paper format only

Skills that use Fluency

  1. Calculating spindle speed, surface speed and feed rate

    Assessed: In the exam and in coursework (NEA)

    Learners calculate metric feeds and speeds for machine tool operations, including spindle speed in revolutions per minute, surface speed in metres per minute and feed rates in millimetres per minute and per revolution. They calculate them in the Unit 3 test and set them correctly on machines in Unit 2.

    Numeracy: Calculation, Strategic competence, Communicating with symbols, Measurement, Fluency

    Getting pupils ready

    Year 7
    Pupils measure how far a wheel travels in one turn and in ten turns and use multiplication to predict the distance for fifty turns.
    Year 8
    Pupils calculate the circumference of bars of different diameters and the distance a point on the surface travels in a minute at a given number of revolutions, giving the answer in metres per minute.
    Year 9
    Pupils use the spindle speed formula with a table of cutting speeds for aluminium and mild steel to work out the speed for turning two bar diameters, then pick the nearest speed on the lathe and explain the choice.
    Show the specification wording and the LNF statements

    Where it is in the specification: Unit 3, Section 3.4.3, page 35; Unit 2, Section 2.1.3, page 19; Unit 2, Section 2.3.6, pages 24 and 25

    “Learners should be able to calculate metric feeds and speeds for specific machine tool operations.”
    Progression step 3
    • I can multiply 2- and 3-digit numbers by a 2-digit number.

    • I can choose an appropriate mental or written strategy and know when it is appropriate to use a calculator.

    • I can use appropriate notation, symbols and units of measurement.

    Progression step 4
    • I can represent and use compound measures, using standard units.

    • I can demonstrate an understanding of the relationship between a formula representing a measurement and the units used.

    • I can use the order of operations including brackets and powers.

    Progression step 5
    • I can understand and use a variety of compound measures.

    • I can use appropriate notation, symbols and units of measurement, including compound measures.

    • I can use a scientific calculator effectively and efficiently to carry out calculations using the available range of function keys.

Good to know

Links with other qualifications

Measuring to tolerances, unit conversions, area and volume and Ohm's law overlap with Mathematics and Numeracy, The Sciences and GCSE Design and Technology. Reading drawings, risk assessments and sector case studies in Wales are shared with VCSE Built Environment.

Source: WJEC Level 1/Level 2 VCSE Engineering specification, approved by Qualifications Wales, teaching from September 2027, for award from 2029 (© WJEC CBAC Ltd 2026).