LNF Cymru Literacy and numeracy for Wales

← All qualifications

VCSE Engineering

VCSE Engineering asks learners to read engineering drawings and technical sources closely, use precise technical vocabulary, write an operations plan and risk assessment, report faults and evaluate the quality of their own work, while the Unit 1 tasks ask them to read a case study and weigh the benefits and challenges of an engineering project in Wales. Numeracy runs through every unit: measuring to tolerances with callipers and micrometers, finding missing dimensions and angles on drawings, converting units, and calculating area, volume, waste, feeds and speeds and Ohm's law, much of it tested in the one hour Unit 3 written test. The single biggest thing KS3 should build is accurate measuring in millimetres against a stated tolerance, together with the confidence to use a formula such as spindle speed or Ohm's law with the right units.

Awarding body
WJEC
Level
Level 1 and Level 2
First taught
September 2027
Amount of literacy work
Medium
Amount of numeracy work
High
Specification
Open the specification
Step before
Foundation Engineering, Entry Level and Level 1
How this qualification is assessed
  • Unit 1: Introduction to the Engineering Sector: Non-examination assessment 8 hours, 20%, 40 marks, set and marked by WJEC, available via Portal
  • Unit 2: Applying Engineering Processes: Non-examination assessment 26 hours, 60%, 145 marks, set by WJEC, marked by the centre and moderated by WJEC
  • Unit 3: Engineering Principles: Written test 1 hour, 20%, 60 marks, set and marked by WJEC, paper format only

Skills that use Reading strategies

  1. Reading engineering drawings and technical information

    Assessed: In the exam and in coursework (NEA)

    Learners extract and interpret engineering drawings, including title blocks, sectional and exploded views, symbols, key features and line types, and use technical information from drawings and other sources to plan and make components. The Unit 2 briefs include engineering drawings and sources, and Unit 3 examines drawing conventions.

    Literacy: Understanding, response and analysis, Reading strategies

    Getting pupils ready

    Year 7
    Pupils read a simple dimensioned drawing of a keyring and find the material, scale and three dimensions, highlighting where each one is shown on the title block or drawing.
    Year 8
    Pupils read a third angle drawing of a small bracket alongside a one page making sheet and answer questions on hole sizes, finish and what each line type means.
    Year 9
    Pupils read an unseen engineering drawing with a supplier data sheet to find a tapping drill size, a surface finish and a tolerance, and point out one missing or wrong piece of information.
    Show the specification wording and the LNF statements

    Where it is in the specification: Unit 2, Sections 2.1.1 and 2.1.3, pages 18 and 19; Unit 3, Section 3.2.1, page 32; Section 3.2, page 38

    “Learners should be able to use technical information from”
    Progression step 3
    • I can read closely, identifying and noting features of texts, e.g. introduction, sequence, illustrations, formality, key vocabulary.

    • I can use a range of strategies for finding information, e.g. skimming for gist, scanning for detail.

    Progression step 4
    • I can use a range of strategies, e.g. speed reading, close reading, annotation, prediction, to skim texts for gist, key ideas and themes, and scan for detailed information.

    • I can read closely, follow up and use additional material in texts to extend my understanding.

    • I can use my knowledge of how different texts are structured, organised and linked to support my understanding of a topic, e.g. use of hyperlinks in a printed/digital text to extend my research and understanding.

    Progression step 5
    • I can read closely, analysing the content, language and impact of texts to deepen my understanding.

    • I can read and analyse a range of unseen, printed and digital texts with concentration and independence.

    • I can use a range of strategies, e.g. speed reading, close reading, annotation, prediction, to skim texts for gist, key ideas and themes, and scan for detailed information, extracting and commenting maturely on key ideas and themes.

Good to know

Links with other qualifications

Measuring to tolerances, unit conversions, area and volume and Ohm's law overlap with Mathematics and Numeracy, The Sciences and GCSE Design and Technology. Reading drawings, risk assessments and sector case studies in Wales are shared with VCSE Built Environment.

Source: WJEC Level 1/Level 2 VCSE Engineering specification, approved by Qualifications Wales, teaching from September 2027, for award from 2029 (© WJEC CBAC Ltd 2026).